Bluetooth Test - Toshiba Tecra M5 Maintenance Manual

3.27 LAN/Modem/Bluetooth/IEEE1394 Test Program
3.27.3

Bluetooth test

To execute this test, press 3 and press Enter.
NOTE: Use another computer that can communicate by the Bluetooth as a reference
machine to perform this test.
Insert a floppy disk containing the test program into the target machine and turn on the target
machine. The following Bluetooth test menu will appear.
######################################################################
#### Bluetooth sub system test program VX.XX
######################################################################
*
* 1....BD_ADDR check
*
* 3... Communications test (DUT mode)
*
* T....communications test (TEST mode)
*
**********************************************************************
....Press test number [1, 3, T] ? _
Press 1 or 3 key to perform the corresponding subtest. To quit the Bluetooth test program,
eject the floppy disk and turn the computer off while the menu above is displayed.
Subtest 01 BD_ADDR check
This subtest checks the BD_ADDR functions. When the Bluetooth test menu
is displayed, press 1 to select the test and press Enter. The following message
will appear:
-----------------------------------------------------------------------------
Bluetooth Subsystem T&D for PCSE(BD_ADDR) VerX.XX Copyright (C) by TOSHIBA Co.
-----------------------------------------------------------------------------
Initializing ...
When the machine has passed the test, it displays BD_ADDR. If BD_ADDR
has no problem, the following message is displayed.
TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL]
3 Tests and Diagnostics
####
3-67
*
*
*
*
*
*
*