Savin 2027 Reference page 32

Troubleshooting
Messages/Second messages
NV-RAM has a problem.
Output tray has been
changed.
Paper in duplex unit. Open
cover and remove paper.
Paper in staple tray. Open fin-
4
isher cover and remove pa-
per.
Parallel I/F board has a prob-
lem.
Print overrun.
Problems with the wireless
board.
Problems with the wireless
card.
RPCS graphic error.
RPCS memory overflow.
RPCS syntax error.
28
Causes
An error has occurred in the
optional memory unit.
The output tray has been
changed because of the paper
size limitation of the selected
tray.
There is a misfeed in the du-
plex unit.
There is paper remaining in-
side the finisher.
An error has occurred in the
parallel interface board.
The image data has been
thinned out due to image com-
pression.
An error may have occurred in
the IEEE 802.11b card (wire-
less LAN board).
An error may have occurred in
the IEEE 802.11b card.
There is insufficient graphics
memory to print the data.
A memory overflow occurred
during the print job. After part
of the data is printed, the print
job is suspended.
Bidirectional transmission
may not be working properly,
or the RPCS™ printer driver
settings may not be correct.
Solutions
Turn off the main power
switch, and back on again. If
the message appears again,
call your sales or service repre-
sentative.
Select the correct output tray.
Open the cover of the duplex
unit, and remove the misfed
paper.
Open the cover of the finisher,
and remove the paper.
Contact your sales or service
representative.
Increase memory capacity.
When installing a memory
module in the machine, con-
tact your sales or service rep-
resentative.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Specify the correct memory
capacity on the [Change Acces-
sories...] option in the RPCS™
printer driver.
To print the image correctly,
install more memory in the
machine, or reduce image res-
olution.
To print the image correctly,
install more memory in the
machine, or reduce image res-
olution.
Confirm the option settings
for the printer driver match
the options installed on the
machine.