Viewing On A Television - Ricoh Caplio G3 Operation Manual

Viewing on a Television

You can also view the still images and movies you have taken on a TV screen. The camera displays
everything on the TV screen just as on its LCD Monitor.
To use your television for viewing, connect your camera to the television with the AV cable that came
with your camera.
To view still images and/or movies on a
television, follow the steps below.
Buttons used here
Securely connect the AV cable to the Video
In terminal on the television.
• If you connect the AV cable to your video recorder's In terminal, you can record what you have shot onto
video.
• Your camera is set to NTSC playback format (used in Japan and other countries) for use with television
equipment, etc. If the equipment you want to connect to uses PAL format (used in Europe and elsewhere),
then switch your camera to PAL format in the Setup Menu before connecting.
• Connecting the AV cable to the camera turns off the LCD monitor display and the speaker output.
Chapter 1 / Section 4 Playing Back Still Images, Movies, and Sounds
Make sure the power is off and open the
camera terminal cover.
Securely connect the AVcable to the Video
Out terminal.
Set the television to "Video" mode. (Set the
input to "Video".)
For details, please refer to the operation manual for
the television.
Turn the camera's Mode Dial to 6
(Playback Mode).
Turn your camera on by pressing the power
button.
92