Changing The Edge Quality Of Still Images (Sharpness) - Ricoh Caplio G3 Operation Manual

Changing the Edge Quality of Still Images (SHARPNESS)

You can change the definition of your still images to either sharp or soft.
At purchase, your camera is set to Normal.
To make changes to the sharpness of still
images, follow the steps below.
Buttons used here
Turn the Mode Dial to 5 (Shooting Mode).
Press the M button.
The Shooting menu appears.
Press the #$ buttons to switch between
displays as required.
Chapter 1 / Section 3 Using Special Features for Improved Photography
Select [SHARPNESS] and then press the
O button.
Press the !" buttons to select the desired
setting.
Press the O button.
Sharpness settings are complete.
Press the M button.
The Shooting Menu closes and the setting value is
displayed on the right of the screen.
This setting will be used for shooting until you change it.
69