Table of Contents
Advertisement
To make changes to exposure settings, follow the
steps below.
Buttons used here
Turn the Mode Dial to
Press the M button.
The Shooting menu appears.
Select [EXPOSURE COMP.] and then press
the O button.
The Exposure Compensation bar appears.
• At purchase your camera is set to 0.0. When it is set to 0.0, no value is displayed.
• Under backlighting conditions, if the subject is not centered in the shooting range, the camera does not
recognize backlighting conditions. Use EXPOSURE COMP.
Chapter 1 / Section 3 Using Special Features for Improved Photography
5
(Shooting Mode).
Press the !" buttons and specify a value.
Moving it to the - (minus) side makes darker. Moving it
to the + (plus) side makes it brighter.
Press the O button.
Exposure Compensation settings are completed.
Press the M button.
The Shooting Menu closes and the setting value
appears in the right of the screen.
This setting will be used for shooting until you change it.
54
Advertisement
Table of Contents
