Table of Contents
Advertisement
Getting the SD Memory Card Ready for Use (CARD FORMAT)
If an error message "This card cannot be used." is displayed, or if you have formatted a card with a
computer or some other device, it will be necessary to format the SD Memory Card prior to use.
If you format a card that still has images stored on it, these will be lost.
For how to format internal memory, see p.108.
To format a memory card, follow the steps below.
Buttons used here
Turn the Mode Dial to 1 (Setup Mode).
The Setup Screen appears.
Select [CARD FORMAT] and then press the
O button.
A screen appears to confirm formatting.
Chapter 1 / Section 6 Changing Camera Settings
Press the $ button to select [YES] and then
press the O button.
Formatting commences. When it finishes the
SETUP screen returns.
If an SD Memory Card is not loaded, a message
will be displayed. After turning the power off,
load an SD Memory Card and repeat the
formatting process again.
Write-protecting your images
If you move the card's write-protection switch to
LOCK, your still images cannot be accidentally
erased and the memory card cannot be
formatted. If you return the switch to the former
position, it is once again possible to erase
images and format the card.
Formatting
Formatting is the process of preparing a card
so image data can be written on it. This is also
called initialization. In general, this term is
commonly used when a floppy disc or other
media is prepared for saving.
107
Advertisement
Table of Contents
