Connecting The Camera To A Computer - Ricoh Caplio G3 Operation Manual

Connecting the Camera to a Computer

After installing the software on your computer, connect your camera to it.
Make sure the camera's power is off.
Connect the USB cable to the USB port of
your computer.
Open the terminal cover, and then connect
the USB cable to its USB terminal.
Your camera turns on.
Disconnecting your camera from computer
1. Turn your camera off by pressing the power button.
2. Unplug the USB cable.
• When you are downloading images from your camera, the AC Adaptor (sold separately) is recommended.
Chapter 2 / Section 1 Downloading Images to a Computer (For Windows)
In Windows XP, the first time you connect your
camera to the computer using a USB cable, the
[Found New Hardware Wizard] screen will
appear.
Select [Install from a list or specific location
(Advanced)].
Select [Next].
Select [Search for the best driver in these
locations.] -[Include this location in the
search] and then press the [Browse] button.
Select the folder, where the Caplio Software
is installed, that has the [WIA driver] (For
example, C:\Program Files\Caplio Software
\WIA driver) and then select [Next].
The WIA Driver is installed.
126