Uninstalling Cinema Color Editor; Connecting To A Computer - Epson dreamio EMP-TW200H User Manual

Uninstalling Cinema Color Editor

If you no longer require Cinema Color Editor, uninstall it by following the procedure below.
Windows
From My Computer, open the Control Panel,
double-click "Add or Remove Programs",
select "Cinema Color Editor", and then click
Add/Remove] (or [Change/Remove] for
Windows XP).

Connecting to a Computer

If connecting using a USB cable, you should install Cinema Color Editor before connecting the
cable.
If using an RS-232C cable, use a cross-type cable.
l
Connecting using an RS-232C cable
* If using Mac OS X or
later, connection
using an RS-232C
cable is not possible.
To RS-232C
port
(commercially-available)
To USB port
•
If the "Add New Hardware Wizard" starts up or a message such as "Software needed
for the USB device is not available." appears when you connect a Windows computer
and the projector using a USB cable, click [Cancel] in the wizard window or the
dialogue box. Disconnect the USB cable, install Cinema Color Editor and then
reconnect the cable.
•
Use the "COM Port" command in the "Operation" sub-menu of the "Setting" menu to
select the port that is being used for the connection. Default setting: USB
To [Control
(RS-232C)] port
RS-232C cable
USB cable (accessory)
Preparation for Using Cinema Color Editor
Macintosh
Follow the instructions that are displayed on the
screen until the following window is displayed.
Select Uninstall.
Click [Uninstall].
Connecting using a USB cable
* Compatible with
USB1.1
To [USB] port
p.19
25