Using Cinema Color Editor
You can use the Cinema Color Editor software that came with your projector to adjust each
color in the picture individually. You can also use the software in place of your remote
control, letting you switch image sources, adjust the picture's aspect ratio, or change image
quality settings right from your computer.
Setting Up Your Computer
Before using Cinema Color Editor, follow the instructions in this section to install the
software and connect the projector to your computer.
System Requirements
You can install Cinema Color Editor on any Windows
minimum requirements:
Windows
Microsoft
®
Windows NT
2000, or XP
®
Pentium
MMX
TM
166 MHz or better
10MB RAM
2MB hard disk space
XGA (1024 × 768) or better display adapter and monitor
®
4.0, 98SE, Me,
®
or Macintosh system that meets these
Macintosh
Macintosh OS 8.6 through 9.x, OS X 10.1.5
or later
Power Macintosh G3 300 MHz or better
7MB RAM
5MB hard disk space
37