Table of Contents
Advertisement
Press
and select the colour mode from the five available modes in the selection menu in accordance
with the place where the projector is being used.
Setting is also possible using the configuration menu.
: Ideal for using in bright rooms.
Dynamic
: Ideal for using in rooms in which the
Living Room
curtains are closed.
: Ideal for using in dark rooms. It is
Natural
recommended that you start in this mode
when making colour adjustments.
If "Natural", "Theatre" or "sRGB" is selected, the Epson Cinema Filter effect will be applied
automatically. This increases contrast and makes flesh tones appear more natural.
When you select "Living Room", the Black-White Stretch function will operate to produce images with
greater contrast between lighter and darker shades.
Press
and select the aspect mode from the selection menu.
Images from
normal TV
broadcasts
Input
Images with
signal
standard aspect
ratio (4:3)
Computer images
Recommended
Normal
aspect mode
Black bands will
Result
appear at the left
and right of the
images.
When HDTV
images are
projected, the
images appear in
16:9 size.
Remarks
Theatre
Images recorded by
Letterbox images
a video camera or
such as from a
DVD software in
DVD
squeeze mode
Squeeze
Input signals will
Input signals will
be projected at
be projected at the
the same width as
same height as the
the projector's
projector's panel
panel resolution.
resolution.
If 4:3 images are
If 4:3 images are
projected, the top
projected, the
and bottom of the
images will be
images will be
elongated
truncated.
horizontally.
If images with
subtitles are
projected and the
subtitles are
truncated, use the
"Zoom Caption"
menu command to
adjust.
Basic Image Quality Adjustments
: Ideal for using in dark rooms.
: If the connected signal source has an
sRGB
sRGB mode, set both the projector and
the connected signal source to sRGB.
(Ideal for viewing computer images.)
Images with an input resolution of
1280 × 720 or less
Images at
standard size
(4:3)
Zoom
Through
The images are
projected onto the
screen with the
input signal
resolution
unchanged.
The images are not compressed or enlarged in
accordance with the panel resolution, and so
clearer images are projected.
To project images so that they fill the whole of
the screen, use the zoom adjustment or move the
projector further away from the screen.
If HDTV images are projected in Through
mode, the images will be elongated horizontally.
p.19
Images recorded
in squeeze mode
Squeeze
Through
Images will be
projected in 16:9
format at the
original input
signal resolution.
9
Advertisement
Table of Contents
