Table of Contents
Advertisement
Remove the old air
filter.
Place your finger under one of
the ribs and lift up.
Remove the lamp
cover.
Lift up slightly from
underneath to remove.
Install the lamp cover,
then tighten the lamp
cover fixing screws.
Select "Lamp - Hours Reset"
from the "Reset" menu.
Insert the new air filter.
Make sure that it faces the
correct way.
Loosen the lamp fixing
screws.
Install the lamp and the lamp cover securely. The lamp will
not turn on if the lamp or the lamp cover is not installed
correctly.
The lamp contains mercury. Dispose of used lamps properly
in accordance with your local regulations.
Select "Yes" and then
press
.
Maintenance
Install the air filter cover.
Remove the old lamp.
Pull out straight.
39
Advertisement
Table of Contents
