Part names and Functions
Rear
• • • •
[S-Video] port
Inputs an S-Video signal to the projector from
other video equipment.
• • • •
[InputB] port
Connects to the RGB port of a computer.
• • • •
[InputA] port
Connects to the component video (YCbCr
or YPbPr ) ports or RGB ports of other
video equipment.
• • • •
[D4] port
Connects to the component video
(YCbCr or YPbPr) ports or D port
of other video equipment.
(Japan only)
• • • •
[Trigger out] port
When the projector power is turned on, a 12 V DC
signal is output from this port. When the projector's
power is turned off or a problem with operation
occurs, the output becomes 0 V to communicate the
projector's power ON/OFF status to an external
device.
Base
6
Setup Guide
Setup Guide
Setup Guide
Setup Guide
p.20
• • • •
Suspension bracket fixing points (4 points)
p.41
Install the optional ceiling mount here when suspending
the projector from a ceiling.
• • • •
[Control (RS-232C)] port
Connects the projector to a computer
using an RS-232C cable when using
the Cinema Color Editor.
• • • •
[USB] port
p.25
Connects the projector to a computer
using a USB cable when using the
Cinema Color Editor.
• • • •
Remote control light-receiving
area
Setup Guide
Receives signals from the remote
control.
• • • •
Security lock
(
)
• • • •
[Video] port
Setup Guide
Connects to general video ports of
other video equipment.
• • • •
Power inlet
Setup Guide
Connects the power cable.
• • • •
Air filter (air inlet)
Prevents dust and other foreign
particles from being drawn into the
projector. It should be cleaned
periodically.
p.25
p.47
p.36, p.38