Additional Egp Objects - HP StorageWorks 8B - FC Entry Switch Reference Manual

1
MIB-II Object Types
egpNeighEventTrigger
Syntax
Value
Integer
Access
Read-write
Status
Mandatory
Description A control variable used to trigger operator-initiated Start and Stop events.
Note:

Additional EGP Objects

egpAs
Syntax
Integer
Access Read-only
Status Mandatory
Description The autonomous system number of this EGP entity.
1-64
Declaration Description
1 (start)
2 (stop)
When read, this variable always returns the most recent value that egpNeighEventTrigger
was set to. If it has not been set since the last initialization of the network management
subsystem on the node, it returns a value of stop.
When set, this variable causes a Start or Stop event on the specified neighbor, as specified
on pages 8-10 of RFC 904. Briefly, a Start event causes an Idle peer to begin neighbor
acquisition and a non-Idle peer to re-initiate neighbor acquisition. A stop event causes a
non-Idle peer to return to the Idle state until a Start event occurs, either via
egpNeighEventTrigger or otherwise.
MIB Reference Manual Version 3.0