HP StorageWorks 8B - FC Entry Switch Reference Manual page 253

swAgtCmtyStr [swAgtCmtyTable]
Syntax
Display String of size 0 to 16
Access
Read-write
Status
Mandatory
Description
This is a Community string supported by the agent. If a new value is set successfully, it takes effect
immediately.
Note:
swAgtTrapRcp [swAgtCmtyTable]
Syntax NetworkAddress
Access Read-write
Status Mandatory
Description This is the trap recipient associated with the Community. If a new value is set successfully, it takes
effect immediately.
Note:
MIB Reference Manual Version 3.0
Default values for communities are as follows:
•
Secret COde
•
OrigEquipMfr
•
private
•
public
•
common
•
FibreChannel
Change the Community setting using the agtcfgSet telnet command.
If not otherwise set, the default IP address for this trap recipient is 0.0.0.0, and the SNMP
trap is not sent for the associated community string.
A setting of non-0.0.0.0 IP address, SNMP traps are sent to the host with the associated
community string.
FCSwitch MIB Object Types
4
4-31