Chapter 2 Setting Up Your System For Network Printing; Overview - Epson EMP 7900 Network Manual

Epson printer network guide

Hide thumbs Also See for EMP 7900:

Table of Contents

Chapter 2

Setting Up Your System for Network Printing

This section describes the general procedure on how to set up the network

interface.

1. Check the network interface operation.

Check the functions and operations of the network interface, such as the

status lights. See "Network Interface Operation" on page 9 for details.

2. Install the necessary network components on your computers.

Make sure that the necessary network components (such as TCP/IP) are

installed on your computers, and network settings (such as the IP address,

subnet mask, etc.) are set.

3. Connect the network interface to the network.

Connect the network interface to the network. See "Connecting the

Network Interface to the Network" on page 16 for details.

4. Configure the network interface and install the printer driver.

See "Configuring the Network Interface" on page 17 for details.

5. If necessary, configure the network settings of the network interface using

EpsonNet Config.

Configure the network interface using EpsonNet Config. For Windows

users, see "About EpsonNet Config" on page 29. For Macintosh users, see

"About EpsonNet Config" on page 30.

Setting Up Your System for Network Printing

Table of Contents