Windows Xp - Epson EMP 7900 Network Manual

Windows XP

For Windows XP, use the following procedure to install the necessary
components.
Note:
The Windows XP CD may be required during the installation.
1. Click Start, highlight Control Panel, and then click Network and Internet
Connections. Select Network Connections.
2. Under LAN or High-Speed Internet, click the Local Area Connection
icon.
3. Under Network Tasks, click Change settings of this connection.
4. Check if the following network components are in the list. If they are
already installed, go to "Network Software" on page 29.
The following table lists the network components required for configuring
the network interface with EpsonNet Config.
EpsonNet Config's setting screens
TCP/IP, SNMP (IP trap)
14
Setting Up Your System for Network Printing
Necessary components
Internet Protocol (TCP/IP)