Epson EMP 7900 Network Manual page 34

10. Select Enable for Register Network Interface Address to DNS Server if
you want to register the host name and domain name to the DNS server
through the DHCP server that supports Dynamic DNS.
If you want to register the host name and the domain name directly to the
DNS server, select Enable for Register Network Interface Address
Directly to DNS Server.
11. Select Enable or Disable for Use Universal Plug and Play. Select
Enable if you want to use the Universal Plug and Play function on
Windows Me or future operating systems.
12. Change the default Universal Plug and Play device name, if desired. This
device name is used for Windows that supports the Universal Plug and
Play function.
13. Mac OS X only:
Select Enable or Disable for Use Bonjour. If you select Enable, enter the
Bonjour Name and the Bonjour Printer Name. If your network environment
supports DHCP, you can use the printer on the network just by enabling
this setting.
14. Click Submit and enter the password, if necessary, to update the settings.
Note:
If you have set the Administrator Name on the Administrator screen, enter the
administrator name for the user name.
15. If the message "Configuration change is complete!" appears on your
screen, the update is complete. Do not exit the Web browser and do not
send a job to the printer until this message appears. Follow the on-screen
instructions to reset the printer.
Note:
❏ Since the new IP address becomes available after the printer is reset, you
need to restart EpsonNet Config by entering the new IP address.
❏ Only changes on the page where you press the Submit button take effect.
34
Network Software