Epson Stylus C12C890191 Quick Reference Manual
Epson printer quick reference guide
Hide thumbs
Also See for Stylus C12C890191:
- Service manual (519 pages) ,
- Network manual (43 pages) ,
- Unpacking and setup manual (30 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Epson Stylus C12C890191
Summary of Contents for Epson Stylus C12C890191
- Page 1 Epson Stylus Pro 7900/9900 ® QUICK REFERENCE GUIDE...
-
Page 2: Printer Parts
Roll paper holder Front cover Ink bay Back Interface connector for optional equipment USB interface Maintenance tank (Pro 9900 includes two tanks, one on each side of printer) Paper basket Roll paper cover Control panel Ink bay Casters Network interface AC inlet... -
Page 3: Loading Roll Paper
Push down the lock lever, then move the roll paper holder to the left. Place the roll paper on top of the printer. If necessary, adjust the roll media adapters to fi t the core size of the roll paper. Then release the tension lever on both adapters. -
Page 4: Removing Roll Paper
Pause/reset button. Check the printer’s control panel and select the correct media type. Roll the paper forward to the top of the printer. Pull up the tension levers, then remove the adapters from the paper roll. Place the roll in its original package. -
Page 5: Automatically Checking And Cleaning The Print Head
OFF—The printer will not perform automatic • nozzle checks and cleaning cycles. Note: You can also run nozzle checks and head cleaning cycles from your computer using the Epson Printer Utility3 (Macintosh driver (Windows). See your Printer Guide for more information. button while ) or the Utility tab in your printer ®... -
Page 6: Manually Checking And Cleaning The Print Head
If your prints look grainy or blurry, or you see misregistration or “ghosting,” you need to align the print head. Make sure the printer is turned on. Load Epson Enhanced Matte paper. (You can also use Epson Doubleweight Matte or Ultra Premium Photo Paper Luster.) -
Page 7: Replacing Ink Cartridges
Vivid Light Magenta (VLM) T596600 When one of the icons has an X and REPLACE INK CARTRIDGE is displayed, the cartridge is expended. To replace the cartridge, fi rst make sure the printer is on. Maintenance tank gauges (one tank for... -
Page 8: Replacing Printer Parts
Replacing Printer Parts Replacing the Paper Cutter If you notice that the paper isn’t cut cleanly, you may need to replace the cutter (part # C12C815331). Menu button on the printer, then Press the until MAINTENANCE is highlighted. press to highlight CUTTER Press again. -
Page 9: Replacing The Maintenance Tank
(left or right). Note: The printer will not print if one of the maintenance tanks is full. On the Pro 9900, the right tank is used more than the left. To maximize tank life, you can switch the tanks. -
Page 10: Control Panel Menus
Ink in milliliters and paper in square centimeters for each saved job; most recent job is number 0 Number of pages printed Status of the printer on myEpsonPrinter.com. If the printer is registered and enabled, displays time of last status upload. - Page 11 Setting appears only when no paper is loaded OFF, ON From 15 to 300 ft From 4 to 50 ft Media type loaded in the printer Paper No 1 to 10 Photo, Proofi ng, Fine Art, Matte, Plain, Others STANDARD, NARROW, WIDE, WIDER PRINT -0.70% to 0.70%...
-
Page 12: Where To Get Help
Epson and Epson Stylus are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. UltraSmooth and Epson UltraChrome are registered trademarks; ePlaten is a trademark; and Epson Preferred and myEpsonPrinter.com are service marks of Epson America, Inc. - Page 13 Control Panel Lights and Buttons Paper light Power light and button Pause/reset light and button Black ink Ink light change button Ink cover open button Left arrow or paper source button Paper feed up button Paper release (ePlaten™) light and button Menu button Paper cut button...