Chapter 5 Tips For Administrators; Network Setup Menu; Setting An Ip Address On The Printer's Control Panel - Epson EMP 7900 Network Manual

Chapter 5
Tips for Administrators

Network Setup Menu

These items are used to make network settings on the printer's control panel.
Item
NETWORK SETUP
IP ADDRESS
SETTING*
IP, SM, DG
SETTING*
Bonjour*
INIT NETWORK
SETTING*
* Available only when Enable is selected for NETWORK SETUP.

Setting an IP Address on the Printer's Control Panel

After connecting the printer to the network, you need to set the IP address for
the network interface.
To set the IP address, subnet mask, and default gateway from the control
panel, follow the steps below.
1. Make sure that the printer is turned on, and the LCD displays READY.
2. Press the Menu r button on the printer to enter the printer's menu system.
3. Press d to highlight NETWORK SETUP, then press r.
4. Press r, then d to highlight ENABLE.
5. Press OK. A checkmark appears next to ENABLE to show that it's selected.
Settings
Disable, Enable
Auto, Panel
0.0.0.0 to 255.255.255.254
On, Off
EXECUTE
Tips for Administrators
39