About Menu - Epson EMP 71 Instruction Manual

About Menu

Displaying Menus
Press the Menu button, use the Enter button to select "About" from the top
menu displayed, and press the Enter button to move to a submenu.
Setting and Display Information
The settings information displayed in the About menu differs as shown below
during video projection from a computer/component versus a video device.
Computer/Component Video Projection
Menu
Lamp
Reset Lamp
Timer
Video Source
Input Signal
Frequency
SYNC Polarity
SYNC Mode
Resolution
Refresh Rate
Video Signal
50
D-Sub15: Computer/Component video Video: Video image
Content
Displays cumulative lamp-on time.
Sets cumulative lamp-on time to zero.
Use this function when replacing the lamp.
Displays the source for the video
displayed on screen.
Displays a computer/component video
input signal.
Displays frequencies.
H: Displays the horizontal scanning
frequency.
V: Displays the vertical scanning
frequency.
Displays sync polarity.
Displays sync attributes.
Displays input resolution.
Displays refresh rate (vertical frequency).
Displays an A/V device signal mode.
(When set to Auto in the menu, "Auto
(NTSC)" is displayed.)
Video Projection
Video Projection
D-Sub15
: Display
Video
: No display