Epson EMP 71 Instruction Manual page 34

Storage
When you are finished projecting, retract the front adjustable feet into the unit.
Foot adjust levers
32
4.
Pull the power cord plug out of the outlet.
Caution:
Do not pull the power cord plug out of the outlet
while the operation display indicator is flashing
orange. This may cause a malfunction or
shorten the projector lamp life.
5.
Set the remote control R/C switch to Off.
Tip:
Unless the remote control R/C switch is switched
off, a small amount of current will be supplied to
the remote control and exhaust the batteries. If
the remote control will not be used for a long
period or you are moving the unit, set the remote
control R/C switch to Off.
1.
Support the projector unit with your hands,
pull upward on the foot adjust levers with
your fingers, and lower the unit slowly.
2.
Attach the lens cover.