Epson EMP 71 Instruction Manual page 27

Projection
When preparations are complete, you are ready for projection.
Projector Remote control
"No-Signal" is displayed.
Depending on your settings,
there may be no display.
(See page 47)
The operation display indicator
lights green.
1.
To use the remote control, turn the remote
control R/C switch to "On".
2.
Press the Power button to switch power on.
The operation display indicator begins to
flash green, and projection begins.
After approximately 30 seconds, the
operation display indicator changes from
flashing green to steady green.
25