Epson EMP 71 Instruction Manual page 46

Menu
Brightness Adjusts image brightness.
+: Brightens image.
- : Darkens image.
Contrast* Adjusts difference in color brightness/darkness.
+: Increases difference in color brightness/
- : Decreases difference in color brightness/
Color Adjusts color depth.
+: Deepens color.
- : Lightens color.
Tint Adjusts tint.
+: Strengthens red.
- : Strengthens green.
Sharpness Adjusts image sharpness.
+: Strengthens sharpness and defines image.
- : Weakens sharpness and softens image.
* If keystone correction makes unevenness
Gamma* Adjusts color of projected image.
Dynamic : Increases contrast. (Used when
Normal : Sets normal contrast.
Natural : Weakens contrast to natural colors.
Input Signal Select the input signal of the computer/
component video in use.
RGB: Computer images
YUV*: Color difference* images
Auto Setup Optimizes computer input image.
(Can only be set when the input signal is RGB)
ON : Auto Setup active
OFF : Auto Setup not active
Mode Select the video mode to use.
* Selection of Auto provides automatic video
Aspect Ratio Select the aspect ratio*.
(Can only be set when projecting a component
video image (YCbCr*, YPbPr*).)
Reset Returns Video menu settings to factory shipping
values.
* See page 52 for factory shipping values.
44
D-Sub15: Computer/Component video Video: Video image
Content
darkness.
darkness.
distinctive, reduce the sharpness.
projecting images containing text and
graphics)
(Used to give projected images a
more natural look)
YCbCr*: DVD images
YPbPr*: HDTV images
signal identification, but for PAL (60Hz) mode,
set to Manual.
To reset all menus to factory shipping values,
use the "Reset All" menu.
: setting available
Video Projection
D-Sub15 Video
: setting not available