Epson EMP 71 Instruction Manual page 24

[Inputting a Component Video Image Signal]
If using a component video cable
DVD player, etc.
Tip:
• When projecting a component video image, select "YCbCr" or "YPbPr" in the Video
> Input Signal menu.
Select "YCbCr" if using a DVD player, and select "YPbPr" if using a HDTV video
source.
• To change the aspect ratio of the projected image between 4:3 and 16:9, select Video
> Aspect Ratio menu.
22
To Y port (Green)
To Pb or Cb port (Blue)
To Pr or Cr port (Red)
Component video cable (optional part)
A/V cable (accessory)
To Audio (L) port (White)
To Audio (R) port (Red)
Computer/Component Video port
Audio (R) port (Red)
Audio (L) port
(White)