Problems With The Projector - Epson PowerLite 8200i User Manual

Projector status and warning lights
Light Status
orange
flashing green
green
flashing orange
red
flashing orange
flashing red
flashing orange
red
flashing red
Solving Problems
84

Problems with the Projector

If the projector is not working correctly, first turn it off and unplug it.
Then plug the power cord back in and turn on the projector. If this
does not solve the problem, check the warning lights on top of the
projector. These lights alert you to problems with projector operation
Description and action
The projector is in sleep mode. You can unplug it to turn it off or press
the Power button to turn it on.
The projector is warming up. Wait for the image to appear.
The projector is operating normally.
The projector lamp is off and the projector is cooling down. You can't
turn the projector on or unplug it when the light is flashing.
Power is cut off because of an internal problem. Unplug the power cord
and contact EPSON.
The lamp is almost burned out. This is a good time to replace it. See
Chapter 4 for instructions.
The lamp is burned out or there is a problem with the lamp power.
Replace it as described in Chapter 4. If replacing the lamp does not solve
the problem, contact EPSON.
The projector is too hot. Turn it off and let it cool before using it.
The projector has overheated. Unplug the projector and let it cool for five
minutes. Then reconnect it and turn it back on. See Chapter 4.
There is a problem with the cooling fan or temperature sensor. Contact
EPSON for help.
projection lamp light
power light
lamp light
temperature light
.