Epson PowerLite 8200i User Manual page 37

Connecting the Mouse and Serial Cables
To use the remote control as a mouse or use the EMP Link V
software, follow the steps below. This illustration shows the
connections you'll be making:
Mouse/Com port
1. Connect the round end of the main cable to the projector's
port, as shown.
Mouse/Com
2. To use the remote control as a wireless mouse, connect one end of
the projector's Mac mouse or USB cable to the
on the square end of the main cable.
3. Connect the other end of the Mac mouse or USB cable to the
mouse or USB port on the back of the Macintosh.
Mac serial cable
Mac mouse or
USB cable
MOUSE
main cable
terminal
Setting Up the Projector
31