Capturing And Saving The Image - Epson PowerLite 8200i User Manual

Capturing and Saving the Image

Follow these steps to capture and save a logo or image:
1. Display the image (with the projector).
2. Press the button on the control panel or remote control to
Menu
display the Main menu.
3. Press the down arrow (control panel) or press down on the
button (remote control) to move to the
4. Press (control panel or remote control) to highlight the
Enter
User's Logo Capture
You see the message "Do you use the present image as a user's
logo?"
5. Select and press
Yes
image.
6. Use the arrow buttons on the control panel or the
on the remote control to select the area of the image you want to
use as the logo. Once you have selected the entire area, press
.
Enter
7. When the message "Do you use this image?" appears on the
screen, select and press
Yes
selected, select
No
8. Use the arrow buttons on the control panel or the
on the remote control to select a zoom rate, and then press
9. When the message "Do you save the user's logo?" appears, select
and press
Yes Enter
.
No
10. When you see the message "Saving the user's logo is completed,"
press the or
Menu
11. Press or
Menu Esc
Capture
option and press
Enter
. A selection box appears over the
Enter
. If you want to change the area
Enter
, press and repeat steps 4 through 6.
Enter
. If you do not want to save the logo, select
button to return to the Capture menu.
Enter
to return to the Main menu.
Enter
menu.
again to select it.
button
Enter
button
Enter
.
Enter
Fine-tuning the Projector
note
Saving the logo may take a
few moments. Do not use the
projector or other sources
(computer, video, speaker,
etc.) while the logo is being
saved.
73