Cleaning The Projector Case; Cleaning And Replacing The Air Filter - Epson PowerLite 8200i User Manual

note
Standing the projector with
the handle at the top prevents
dust from getting inside the
projector housing.
Maintaining and Transporting the Projector
78

Cleaning the Projector Case

Before you clean the case, turn off the projector and unplug the power
cord.
I To remove dirt or dust, wipe the case with a soft, dry, lint-free
cloth.
To remove stubborn dirt or stains, moisten a soft cloth with water
I
and a neutral detergent. Then wipe the case.
Do not use alcohol, benzene, thinner, or other chemical
I
detergents. These can cause the case to warp.

Cleaning and Replacing the Air Filter

Clean the air filter at the bottom of the projector after every 100 hours
of use. If it is not cleaned periodically, it can become clogged with
dust, preventing proper ventilation. This can cause overheating and
damage the projector. To clean or replace the air filter, follow these
steps:
1. Turn off the projector and unplug the power cable.
2. Turn the projector on its side so that the handle is on top and you
can access the filter easily.
3. To clean the filter, EPSON recommends using a small vacuum
cleaner designed for computers and other office equipment. If you
don't have one, gently clean the filter using a very soft brush (such
as an artist's camel-hair brush).