Setting Up the Projector
28
4. To use the EMP Link V software or to program new effects for
the Effects buttons on the remote control, connect one end of the
Mac serial cable to the
5. Connect the other end of the Mac serial cable to the
or
modem port on the back of your Macintosh.
Connecting the Audio Cable
1. If you'll be using audio, connect one end of the 3.5-mm audio
cable to the
Audio
2. Connect the other end of the audio cable to the audio-out port on
your computer.
terminal on the main cable.
MAC SERIAL
port on the projector.
Audio port
printer
audio cable