Unix Tcp/Ip; Information Checklist - Xerox WorkCentrePro 123 System Administration Manual

4 UNIX TCP/IP

This chapter explains how to set up the machine to operate in a UNIX TCP/IP
environment. The UNIX Workstation Operating Systems (OS) supported are Solaris,
SunOS, and HP-UX. The following information is provided.
Information Checklist – page 47
UNIX TCP/IP Environments – page 48
UNIX TCP/IP Installation – page 48
Installation Procedure – page 48
Network Communication Setup – page 49
Workstation Setup – page 50
Test Print – page 55
Printing – page 55
Solaris/HP-UX – page 55
SunOS – page 57
Printer Status – page 59
Solaris/HP-UX – page 59
SunOS – page 60
-C Option – page 61

Information Checklist

Before installing the UNIX TCP/IP features on the machine, make sure that the
following items are available or have been performed.
An existing operational network utilizing a UNIX TCP/IP protocol is
required. These steps are not designed to install the UNIX TCP/IP
network.
SunOS 4.1x, Solaris 1.x, 2.x, 7.x, 8.x, 9.x, HP-UX 9.x, 10.x, 11.x
Make sure that the correct IP Address is being used for the machine.
Make sure that the Gateway Address is set correctly.
Make sure that the Subnet Mask is set correctly.
Make sure that the Host Name is set correctly.
Test the copy and fax features of the machine, to make sure that they are
installed fully and functioning correctly.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide
Item By
Customer
Customer
Customer
Customer
Customer
Customer
Customer
47