Usb Port; Information Checklist - Xerox WorkCentrePro 123 System Administration Manual

9 USB Port

This chapter explains how to set up the machine in a USB port environment. The
following information is provided.
Information Checklist – page 89
USB Port Environment – page 90
USB Port Installation – page 90
Installation Procedure – page 90
USB Port Communication Setup – page 91
Workstation Setup – page 91
Test Print – page 92

Information Checklist

Before starting the USB port installation procedures, make sure that the following items
are available or have been performed.
USB Cable
Test the machine to make sure that it is installed fully and functioning
correctly.
Install the print driver.
NOTE: The installation procedures will install the machine on the USB port of the host
workstation. The procedures are not intended to connect the host workstation to other
workstations.
If problems are encountered during the installation of the machine, refer to the Problem
Solving chapter for assistance.
CAUTION: Do not connect the USB cable to the machine until instructed to do
so.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 System Administration Guide
Item By
Customer
Customer
Customer
89