Zenith L26W56SA Installation And Operating Manual page 47

Detailed Descriptions of Installer Menu Items
053 - DIS. CH-TIME (Disable Channel-Time)
Set to 1 to disable the Channel-Time display, ChanneL-Time display
will not appear.
Set to 0 to enable the ChanneL-Time display.
069 - EN. CH-T COL. (Enable Channel-Time Custom Color)
Set to 1 to enable custom color for the ChanneL-Time display.
Set to 0 to disable custom color for the ChanneL-Time display.
070 - FOR. CH-TIME (Channel-Time Display Foreground Color)
Set according to CoLor Chart.
0 = BLack 3 = YeLLow 6 = Cyan
i = Red 4 = BLue 7 = White
2 = Green 5 = VioLet
*Note: If foreground and background colors are the same, menu
background is transparent.
071 - BCK. CH-TIME (Channel-Time Display Background Color)
Set according to CoLor Chart.
0 - BLack 3 - YeLLow 6 - Cyan
i = Red 4 = BLue 7 = White
2 = Green 5 = VioLet
*Note: If foreground and background colors are the same, menu
background is transparent.
073 - CH NOT AVBLE (Channel Not Available)
If set to 1 and item 028 CHANNELOVERRIDE is set to O, "NOT
AVAILABLE" message is displayed when directly accessing a channel
not in the channel scan List avaiLabLe in memory.
075 - REVERTCH (Revert to Start Channel)
If set to 1 and loss of M.P.I. communication occurs, TV automatically
tunes to the specified Start ChanneL.
077 - QUICK SHUTOFF
ALLowsTV power off to be controLLed by the pillow speaker channel
selection button. User would press and hold button down for time
required to have TV turn off. VaLue Range 0 ~ 17, each number
represents 1/2 second. For example, if set to 4, TV would turn off if
user held speaker channel button down for 2 seconds.
078 - UPN MSB (UPN Most Significant Byte)
User programmable number, most significant byte readable by M.P.I.
command. Note: Not Linked to serial number.
079 - UPN MSB-1 (UPN Most Significant Byte-l)
User programmable number, most significant byte-1 readable by
M.P.I. command. Not Linkedto serial number.
080 - UPN MSB-2 (UPN Most Significant Byte-2)
User programmable number, most significant byte-2 readable by
M.P.I. command. Not Linked to serial number.
081 - UPN LSB (UPN Least Significant Byte)
User programmable number, Least significant byte readable by M.P.I.
command. Not [inked to serial number.
082 - CHKSM ERROR (Checksum Error)
Enforces rigid M.P.I. checksum validation.
Set to 1 for validation.
Set to 0 to disable (does not check checksum on M.P.I. async port).
SPI is always checked.
083 - HANDSHK TIME (Handshake Time)
Adds an additional delayto the handshaketime which is64 msec,
thusreLaxing M .P.I. timing requirements t o be compatiblewith PC
based Windows controL[ed systems, rangeis0 - 5.
(Timeout= 25.5MS + [25.5MS* Handshaketime]).
084 - PERMANENTBLK (Permanent Block)
ALLowsLock (Parental ControL) blocking schemes to be permanent by
disabling the blocking hours function.
Set to 1 to instaL[ Parental Control restrictions permanently.
Set to 0 for user-specified hours control of blocking schemes.
087 - REAR RGB EN. (Rear RGBt Enable)
ControLs a ccessto rear RGBI inputon display pane[.
Set to 1 to enable RGB1 input for DTV.Set to 0 to disable RGB1
input.
*Note" The setting above is ignored if Installer item 093 RiP
AVAILABLE,issetto I. Then 087 - REAR RGB EN. above,always
resets itself to PC (1) -- regardless of what value appears for item 087
on the Installer menu.
088 - EN NOISE MUTE (EnableNoise Mute)
Ifsetto 1, audiomutes ifno signal ispresent.
090 - KEY LOCK
If set to 1, display panel keyboard is Locked out, not avaiLabLe to end
user. [R receiver remains functionaL.
091 - YPrPb2 EN. (Rear Component Video 2 Enable)
Set to 1 to enable display panel Component 2 input.
Set to 0 to disable display pane[ Component 2 input.
092 - RGB2 ENABLE (Red-Green-Blue2 Enable)
Setto i to enabledisplay pane[Video 3 inputforCompositeVideo,
setto 2 to enableforS-Video. S et to 0 to disable display panel
Video3 input.
093 - RiP AVAILABLE
Set to 1, remote jack pack is available.
Set to O, remote jack pack is not avaiLabLe.
*Note: This item can not be set to 1 if item 040 AUTO CAHPORT is set
to1.
(Continued on next page)
PAGE 47