Zenith L26W58HA Installation And Operating Manual, Warranty
  1. Manuals
  2. Brands
  3. Zenith Manuals
  4. Monitor
  5. L26W58HA and
  6. Installation and operating manual, warranty

Zenith L26W58HA Installation And Operating Manual, Warranty

Lcd tv/monitor
Hide thumbs Also See for L26W58HA:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation and Operating Guide | Warranty
Model Number | L26W58HA | LCD TV/Monitor
© Copyright 2007, LG Electronics U.S.A., Inc.
t a b l e o f c o n t e n t s
installer quick setup guide
Zenith and the lightning Z logo are registered
trademarks of Zenith Electronics Corporation
5
page
63
page

Advertisement

Table of Contents
loading

Related Manuals for Zenith L26W58HA

Summary of Contents for Zenith L26W58HA

  • Page 1 Installation and Operating Guide | Warranty Model Number | L26W58HA | LCD TV/Monitor t a b l e o f c o n t e n t s page installer quick setup guide page Zenith and the lightning Z logo are registered trademarks of Zenith Electronics Corporation ©...

  • Page 2: Safety Warnings

    For Customer Support/Service please call: The model and serial number of this LCD TV/Monitor are located on the back of the cabinet. For future reference, 1-888-865-3026 we suggest that you record the serial number here: MODEL NO. L26W58HA www.zenith.com www.lgcommercial.com SERIAL NO.____________________________________ CAUTION...
  • Page 3 CAUTION: Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product. COMPLIANCE: The responsible party for this product’s compliance is: LG Electronics U.S.A., Inc., 2000 Millbrook Drive Lincolnshire, IL 60069, USA.

  • Page 4: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.

  • Page 5: Table Of Contents

    To perform a normal installation set up, you need an installer's remote and the LT2002 Quickset II Clone Programmer – both are shown and described in later sections. See your Zenith/LG dealer if you wish to purchase the Installer remote and LT2002.

  • Page 6: Setup Checklist

    Overview • Unpack the LCD TV/Monitor and all need a clone programmer. Is there a accessories. • Set up Installer's remote control, see Zenith LT2002 Clone Programmer page 20. available? • Determine installation location for the Yes___ No___ LCD TV/Monitor, TV stand or mount.

  • Page 7: Installation/Connections Overview

    Installation/Connections Overview To hook up source equipment, see below and also refer to the Table of Contents on page 5; shows pages to go to for equipment hookup options. AUDIO/ VIDEO 2 (SIDE AUTO- CAMPORT) AUDIO / VIDEO 1, 3 IN Connect Audio / Video RS-232C SELECT equipment to these jacks.

  • Page 8: Vesa Standard Tv Mounts

    VESA Standard TV Mounts VESA Standard 200mm TV Mounts and Stands Following are shown some examples of VESA standard 200mm mounts. Since there are numerous types of stands and mounts available, only a few are shown here. Refer to the instructions provided with the TV stand that will be used to mount the TV.

  • Page 9: Antenna

    AC power. Adapter If the antenna is a 75 ohm RF cable, then no adapters are required. A 300 to 75 ohm adapter is not included with the Zenith LCD TV/Monitor. Connections Panel RF Coaxial Wire (75 ohm) Mini glossary 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider.

  • Page 10: Cable Service

    Cable Service Hookup Connect cable service to the LCD TV/Monitor. Locate the Antenna/Cable jack on the back of the TV. Connect the cable wire to the Antenna/Cable jack according to one Cable TV of the diagrams to the right. Wall Jack After all connections are complete, plug in the TV.

  • Page 11: Antenna & Vcr

    Antenna & VCR Hookup Connect antenna and a VCR to the LCD TV/Monitor. Locate the Antenna/Cable jack on the back of the VCR. Connect the antenna wire that runs from the wall jack to the VCR. Connect other wires according to the diagram to the right.

  • Page 12: Cable Service With Vcr

    Cable Service with VCR Hookup Connect cable service and a VCR to the LCD TV/Monitor. Locate the Antenna/Cable jack on the back of the VCR. Connect the cable service wire to the VCR. Connect other wires according to the diagram to the right. After all connections are complete, plug in the TV.

  • Page 13: S-Video (Dvd-Vcr)

    S-Video Hookup (DVD-VCR) Locate the S-Video out port on the DVD or VCR. Connect an S-Video cable between the DVD player and S-Video In on the TV. Make R - L Audio connections as indicated VIDEO 1 VIDEO IN AUDIO IN to the right.

  • Page 14: Pillw Speaker Hook Up

    Controlling the TV with Serial Data with LCD TV/Monitor. The TV is capable of being controlled by a single-wire, serial data signal. This is a Zenith patented technology and is being implemented by certain brands of “smart” pillow speakers, such as Curbell’s “GEN-II” models.

  • Page 15: Power Cord Hookup

    Power Cord Hookup Connect the AC power cord directly to the LCD TV/Monitor. AC Power Cord Hookup The LCD TV/Monitor is designed to operate on 120V AC power. Locate the AC Power Cord input socket on the back of the LCD TV/Monitor. Insert the AC power cord connector into the AC Socket on the TV as shown below.

  • Page 16: Front Panel Controls

    Front Panel Controls Using the front control panel to operate the LCD TV/Monitor. Power / Standby Indicator Glows red in Standby mode. Glows green when the TV is turned on. Glows orange in Sleep Timer and/or Alarm mode. Remote Control Sensor TV Operation Press the POWER button to turn the LCD TV/Monitor on from standby mode.

  • Page 17: On-Screen Menus Overview

    On-Screen Menus Overview Descriptions of the menus and on-screen displays. Menu Name Page Description ON-SCREEN MENUS CHANNEL MENU Adjusts the basic operational features of the TV. Auto Program Automatically finds and stores active channels to scroll through using Channel Up/Down. Channel List Manually picks and chooses which active channels will appear when using Channel Up/Down Channel Label...

  • Page 18: Other Menus And On-Screen Displays

    Other Menus & On-Screen Displays Use the remote keys indicated below to access these menus and displays. In this manual, the OSD (On Screen Displays shown) may be different. The following are just generic examples to familiarize you with the TVs options. TIMER English Volume Display...

  • Page 19: User Remote Control Key Functions

    User Remote Control Key Functions A brief list of the keys on the optional patient remote control and what they do. CC (Closed Captioning) FLASHBK (Flashback) Press to access closed captions. Returns to the previous channel viewed. POWER MUTE Turns TV On or Off. Turns sound Off and On, while the picture remains.

  • Page 20: Installer Remote Key Functions

    Installer Remote Control Key Functions A brief list of the keys on the optional installer’s remote and what they do. MUTE POWER Turns sound Off and On, while the picture Turns TV On or Off. remains. GUIDE Use to view DTV program information. BANK Press and repeat to select a Channel Press to activate English subtitles.

  • Page 21: Auto Program (Do A Channel Search)

    Auto Program (Channel Search) Use Auto Program to automatically find and store all of the channels available in the selected Tuning Band. *Note: Tuning Band must be set before doing the channel search. See Installer menu item 003 Band/AFC. Default setting is 1, for CATV. When Auto Program is run, any assigned channel labels are automatically removed.

  • Page 22: Channel List

    Channel List After the channel search, remove unwanted channels. Removing unwanted channels Review the channels found, you may remove unwanted channels. Antenna Auto Program Channel Label Press the MENU button. Then use the ADJ button D / E Channel Channel List to select the Channel menu, then press the OK (Enter) Fine Tune button.

  • Page 23: Channel Labels Setup

    Channel Labels Setup *Note: If you add channel labels to existing channels, then re-run Auto Program, the labels will all be deleted. Antenna Channel Labels Setup Auto Program Channel Label Channel Channel Labels help the user identify the channel or network being viewed. Channel List In the Setup menu with the Channel Labels option highlighted, use the ADJ Fine Tune...

  • Page 24: Clock Setup

    Clock Setup Manual Time Settings Time - Use the ADJ buttons to set the year, month, day, hours D / E / F / G V-Chip and minutes. Setup Menu Language English Press the MENU button and then use the ADJ button D / E Menu Transparency...
  • Page 25 Clock Setup (Continued) Automatic Time Settings - If you select auto time setting, time will be set from the digital Time broadcast information. V-Chip Press the MENU button and then use the ADJ button Setup D / E Menu Language English to highlight the Setup menu.
  • Page 26 Clock Setup (Continued) Daylight Saving Time Installer can elect to use Daylight Savings to adjust the clock time. V-Chip This is operated from the Automatic Time Settings. Setup Menu Language English Menu Transparency Transparent Press the MENU button and then use the ADJ button D / E Set ID...

  • Page 27: Menu Language

    Menu Language Choose a language for the on-screen menus. Time V-Chip Press the MENU button and then use the ADJ button D / E to highlight the Setup menu. Setup Menu Language English Menu Transparency Transparent Press the OK (Enter) button. Set ID 11:20 PM Use the Down ADJ arrow to highlight Menu Language and...

  • Page 28: V-Chip

    V-Chip Entering a PIN (Password) - This option sets up or changes the password for blocking program ratings. Time V-Chip Press the MENU button and then use the ADJ button D / E Setup to highlight the Setup menu. Menu Language English Menu Transparency Transparent Press the OK (Enter) button.
  • Page 29 V-Chip (Continued) TVPG Ratings -You can block programs based on the TV program rating. Press the MENU button and then use the ADJ button D / E to highlight the Setup menu. Time V-Chip Press the OK (Enter) button. Setup Menu Language English Menu Transparency Transparent...
  • Page 30 V-Chip (Continued) MPAA Ratings -Restricting movies by their rating. Time V-Chip Press the MENU button and then use the ADJ button D / E Setup to highlight the Setup menu. Menu Language English Menu Transparency Transparent Press the OK (Enter) button. Set ID 11:20 PM Use the Down ADJ arrow to highlight V-Chip and press the...
  • Page 31 V-Chip (Continued) Canadian English Ratings Press the MENU button and then use the ADJ button D / E to highlight the Setup menu. Time V-Chip Press the OK (Enter) button. Setup Menu Language English Use the Down ADJ arrow to highlight V-Chip and press the Menu Transparency Transparent OK (Enter) button.

  • Page 32: Caption Menu

    Caption Menu Turn Captions On/Off *Note: Pressing CC on the remote to select a captions option will also turn closed captions on. On/Off Analog Mode Press the MENU button and then use the ADJ button Digital Mode Service1 D / E Caption Digital Font Option to highlight the Caption menu.
  • Page 33 Caption Menu (Continued) Digital Captions Mode - Digital Captions only appear on digital channels, tune in a digital channel that is actually broadcasting digital captions. On/Off *Note: Pressing CC on the remote selects a captions option. Analog Mode Digital Mode Caption Digital Font Option Press the MENU button and then use the...

  • Page 34: Sound Menu

    Sound Menu Set up the audio options for the end user Sound Mode Setup - Match the sound mode to the program’s character, Music, Movie Sports, or News. Press the MENU button and then use the ADJ button D / E Mode Standard to highlight the Sound menu.
  • Page 35 Sound Menu (Continued) Automatic Volume Control Settings - Have the TV automatically maintain the sound level between different channels. Press the MENU button and then use the ADJ button D / E to highlight the Sound menu. Mode Standard Balance Digital Output Press the OK (Enter) button.

  • Page 36: Picture Menu

    Picture Menu Picture Mode Setup - Set the picture mode to the program content, e.g. Dynamic or Mild etc. Mode Color Temperature Normal Press the MENU button and then use the ADJ button D / E Screen Format 16:9 Picture to highlight the Picture menu.
  • Page 37 Picture Menu (Continued) Color Temperature Settings Press the MENU button and then use the ADJ button D / E to highlight the Picture menu. Mode Color Temperature Normal Screen Format 16:9 Press the OK (Enter) button. Picture Noise Reduction Film Mode Use the Up/Down arrow button to choose Color Temperature, press the OK (Enter) button.

  • Page 38: Managing The Channel Banks

    Managing the Channel Banks The TV has four channel banks, where the administrator or installer can store groups of TV channels. PLANNING THE CHANNEL BANKS ADDING / DELETING CHANNELS Generally, TV channels are grouped into “program packages” A previously prepared programming chart is helpful. with terms that are proposed to the end user.
  • Page 39 Managing the Channel Banks Examples of typical channel banks chars filled in Figure 1. Typical channel banks after running Auto Program Purpose Channel Number 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A = Active - - Channel was found during AUTO PROGRAM Figure 2.
  • Page 40 Managing the Channel Banks PLAN YOUR CHANNEL BANKS BY FILLING IN THESE CHARTS (or use photocopies) Purpose Channel Number 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Purpose Channel Number 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Purpose Channel Number 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75...

  • Page 41: Installer Overview

    If the Master TV display panel’s clonable features like: Clock Set, adding channel icons and channel labels, etc. are not done properly, then the cloned L26W58HA TVs will all have problems. For example, do not do 2-5-5 + Menu more than once or the TV setup will become corrupted.

  • Page 42: Commercial Mode Setup

    2.Set Up TV Features (See Picture, Sound, Setup menus etc. See TV Clonable options list on page L26W58HA Installer Menu Items 52.) Installer Note: Some TV features will have to be set up after running Auto Program. An example is Digital Font options. This feature is not available until digital channels are found in the channel scan.

  • Page 43: Cloning Connections/Learning Setup

    Master L26W58HA *Note: It is assumed that the L26W58HA is connected to a signal source, the source selected is Antenna (RF) In, the signal is from an Analog channel, not a digital channel, all equipment is connected to power and turned on and the LT2002 Clone Programmer main menu (THE CLONE HAS CONTROL OF THE TV) menu is displayed on the TV screen, the clone programmer LED is blinking the required heart beat pattern, see above and next page.

  • Page 44: Cloning Programmer Learning Setup

    Clone Programmer Learning Setup Learning the Master TV Setup Instructions for the Clone Programmer to Learn the Master L26W58HA Setup. THE CLONE HAS CONTROL OF THE TV Use MPI Cable to Connect LT2002 Clone Programmer to THE CLONE IS VERSION...

  • Page 45: Cloning Connections/Teaching Setup

    Cloning Connections / Teaching Setup Teaching the Master Setup to Another L26W58HA Connections for the LT2002 to Teach another L26W58HA the Master Setup Antenna Ferrite Core or CATV (TDK, ZCAT 2035-0930) Master L26W58HA Clone Programmer CLONE SELECTION MENU (1) LEARN FROM TV...

  • Page 46: Installer Menu

    Installer Menu Use the Installer’s Menu to set up or change operational settings. See more detailed descriptions of the Installer menu items on the following pages... Accessing the Installer’s Menu Make sure TV is on. Installer’s menu items can be accessed by using an installer’s remote L26W58XX PTC INSTALLER MENU control.
  • Page 47 Installer Menu Installer Menu Items 035 through 117 Menu Item Function Value Range Default Value Brief Description of Function and Comments COMPPORT EN. 0 / 1 Set to 1 to enable HDMI. Set to 0 to disable. YPrPb EN. 0 / 1 Set to 1 to enable display panel Component 1 input jacks.
  • Page 48 3 = 3698 (Installer item 004) where the start channel may, for example, be set to 3 or 4. If the start channel is 3, then the L26W58HA will 001 - POWER MANAGE (Power Management) remain locked on Channel 3.
  • Page 49 Default set to ZEN 1 for Zenith IR remote control opera- also set at 0. Change values with ADJ Left/Right arrow keys. It may tion. Set O, P LBL for Zenith Private Label IR remote con- be best to set the same value on every L26W58HA.
  • Page 50 Installer Menu Detailed Descriptions of Installer Menu Items 035 - COMPPORT EN. (Computer Port Enable) 073 - CH NOT AVBLE (Channel Not Available) Enable/disables display panel HDMI input jack. Set to 0 to disable, If set to 1 and item 028 CHANNEL OVERRIDE is set to 0, “NOT set to 1 to enable.
  • Page 51 Installer Menu (Continued from previous page) 087 - REAR RGB EN. (Rear RGB1 Enable) 102 - ATSC BAND Controls access to rear RGB1 input on display panel. Sets up TV to receive different types of incoming signals: Set to 1 to enable RGB1 input for DTV. Set to 0 to disable RGB1 0=Broadcast, 1=CATV, 2=HRC, 3=IRC, 4=Same as NTSC.

  • Page 52: Reference

    Reference: TV Features / Menus that can be Cloned Clonable Menu Features Channel Picture Sound Setup Caption Auto Program (Active Mode Mode Time On/Off channels found with Contrast Treble Clock Analog Mode the channel search) Brightness Bass Auto Off Digital Mode Channel Labels Color Balance...
  • Page 53 Editing and adding the labels can only be done if there are If there is no pre-assigned ICON, you can make a channel label of up channels entered into the L26W58HA’s channel map either by to 7 characters to help in identifying the channel or network.
  • Page 54 The following describes the procedure for preparing a Master 5. Assign ICONs to the channels using the Channel Label Menu. L26W58HA for cloning and the procedure for adding Channel Icons Note: You can add Channel ICONS typically network logos like and/or Labels.
  • Page 55 Procedure to Check Software Version The software version of the L26W58HA may be checked by accessing the INSTALLER MENU. To do this, press the MENU button at least 10 times until the menu display ceases to respond to MENU key presses.

  • Page 56: L26W58Ha Camport Auto Sense Operation

    L26W58HA Camport Auto Sense Operation The CAMPORT Auto Sense function is enabled when: CAMPORT (Front Video) Functionality Control 1. Installer Menu Item 34, CAMPORT EN is set to 1 AND Item 34 Item 40 Front Video 2. Installer Menu Item 40, AUTO CAMPORT is enabled (1).

  • Page 57: L26W58Ha Aux Input Configuration/Troubleshooting

    L26W58HA Aux Input Configuration / Troubleshooting L26W58HA Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DATA DIRECT ACCESS STATUS L26W58HA STATUS TYPE TYPE 0xD2 STATUS Tuning Installer Menu 0x41 SOURCES CURRENT AV TYPE 0X0D SOURCE ENABLED (R/W) SOURCE (R)

  • Page 58: Troubleshooting

    - Set Item 103 to 0 for information to be added to virtual 46~51 channel tuning digital OSD. available display. physical channels tuning. *Note: For other problems not caused by the L26W58HA, refer to other devices’ operating guide. P A G E 5 8...

  • Page 59: Reference: Cloning Procedure Troubleshooting

    • After cloning operations are complete, just unplug the LT2002 from the L26W58HA. • If the L26W58HA does not display a picture on the TV (blank screen) after a few seconds, just change channels. P A G E 5 9...

  • Page 60: Clone Troubleshooting Flow Chart

    Clone Troubleshooting Flow Chart Controller Quick Check POWER Plug Press ’POWER’ or ’ON/OFF’ LED on Connected to into AC DTV Board key on TV AC Power Power Outlet Blinking TV Turn 1. Bad TV Press ’POWER’ or ’ON/OFF’ or ’VOLUME UP/DOWN’ or ’MUTE’...

  • Page 61: Tv Operating Check

    TV Operating Check Press the "On/Off" key on the front panel. The On/Off key is always operational. you get Bad TV a response Leave TV set On Go to Installer menu by pressing "MENU" until the TV stops responding. TV stop TV is in responding Stopped...

  • Page 62: Glossary Of Terms

    It screws onto the Antenna/Cable Digital Video Interface Actual digital major, dashed minor channel threaded jack on the back of the L26W58HA. Accommodates analog and digital interfaces number that a station is broadcasting on. 300 TO 75 OHM ADAPTER with a single connector.

  • Page 63: Installer Quick Setup Guide

    Installer Quick Setup Guide Quick Setup Guide for Integrated Master TVs See table of contents for more information. Antenna AC Power Wall Jack Cord RF Coaxial Wire (75ohm) Setup Instructions for Making a Master TV 1. Connect TV to signal source, connect power cord and turn TV power on. L26W58XX PTC INSTALLER MENU 2.

  • Page 64: Warranty

    Your Zenith LCD TV/Monitor Warranty LCD TV/Monitor Welcome to the LG family! We believe that you will be pleased with your LCD TV/Monitor. Please read this warranty carefully, it is a “LIMITED WARRANTY” as defined under Federal Law. This warranty gives you specific legal rights, and you may also have other rights that vary from state-to-state within the U.S.A.

Table of Contents