1. Manuals
  2. Brands
  3. Zenith Manuals
  4. Monitor
  5. L26W56SA and
  6. Installation and operating manual

Zenith L26W56SA Installation And Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Installation
and Operating
Guide
i Warranty
Model
Numbers
I L26W56SA
• L26W56BA
° L26W56WA
I LCD TV/Monitors
table
of
contents
insta[ter
quick setupguide
zenith
Z_,sith and the [ightni_
Z loge ate _egi_,t_ed
©
Copyright
2007,
LG Electronics
U.S.A,.
lnc.
tradema_&s of Zenith E_ectro_ics Corporation

Advertisement

Table of Contents
loading

Related Manuals for Zenith L26W56SA

Summary of Contents for Zenith L26W56SA

  • Page 1 Guide i Warranty Model Numbers I L26W56SA • L26W56BA ° L26W56WA I LCD TV/Monitors table contents insta[ter quick setupguide zenith Z_,sith and the [ightni_ Z loge ate _egi_,t_ed © Copyright 2007, LG Electronics U.S.A,. lnc. tradema_&s of Zenith E_ectro_ics Corporation...
  • Page 2 The mode[and serial number of this LCDTViMo_itor a_e Locatedon the back of the cabinet. For future reference, we suggest that you recordthe serial number here: MODEL NO.L26W56SA, L26W56BA, _6W56WA www.zenith,com www.[gcommercial,com SERIAL NO....................CAUTION CAUTION: TO REDUCETHE RISKOF ELECTRIC S HOCK DO NOT REMOVE COVER (ORBACK). NO USERSERVICEABLE P ARTSINSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

  • Page 3: Cleaning And Disinfection

    CAUTION: Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification couLd void the user's authority to operate this product, COMPLIANCE: The responsible party for this product's compliance is: LG Electronics U.S.A., I nc.,...
  • Page 4 1. Read these i nstructions. 2. Keep these i nstructions. 3. Heed a LL warnings. 4. FolLow aLL instructions. 5. Do notuse thisapparatus near w ater. 6. CLean onLy withdry cLoth. 7. Do notbLock any ventiLation openings. InstaLL inaccordance withthemanufacturer's instructions.
  • Page 5 II CLone Programmer both are shown and described in Later sections. See your Zenith/LG deaLer if you wish to purchase the InstaLLer remote and LT2002. The instaLLer remote aLLows access to the InstaLLer menus, User menus in the ManuaL Channel Set options on the Setup menu.

  • Page 6: Table Of Contents

    To copy the TV's setup, the installer will • Unpackthe LCDW/Monitorand art need a clone programmer. Is there a accessories. • Set up InstaLLer's remote control, Zenith LTIO02 CLone Programmer page 20. • Determine instaLLation Locationfor the available? LCDW/Monitor, TV stand or mount.
  • Page 7 To hook up source equipment, see below and also refer to the Table of Contents on page 5; shows pages to go to for equipment hookup options, AUDIO / VIDEO 1, 3 IR Connect Audio /Vldeo equipment to thesejacks. RS-232C SELECT SWITCH UPDATE COMPONENT I,2 IN...
  • Page 8 There are several Vesa standard mounts available that can be used with this TV. The mount shown to the fight would be installed on the TV back using required bolts in the four pre-threaded holes provided. Follow any instructions supplied with the Vesa mount if one is to be used for the TV installation.
  • Page 9 (300 ohm) If the antenna _s a 75 ohm RF cable, then no adapters are required. A 300 to 75 ohm adapter is not included with the Zenith LCD TV/_4onitor. Co_nectioD_s Panel RF (:oax_a[ Wi_e (75 ohm) 75 OHM RF CABLE The wire that comes from an off-air antenna or cable ser_,ice providen Each end looks like a hex shaped nut with a wire sticking through the middle,and itscrewsonto the threaded jackon the back of the TV.
  • Page 10 Conne_ cable seMce to the LCD TV/t4onitor. Locate the Antenna/CabLe jack on the back of the TVo Connect the cable wire to the CabLe TV Antenna/CabLe jack according to one WaLLJack of the diagrams to the right. After aLL connections arecomplete, p[uginthe W.
  • Page 11 Connect antenna and a VCR to the LCD l_//Monitor. Locate the Antenna/Cable jack on the back of the VCR. Connect the antenna wire that runs from the wall jack to the VCR. Connect other wires according to the diagram to the right. After air connections are complete, ptug in the TV.
  • Page 12 Connect cable service and a VCRto the LCD IV/Monitor. Locate the Antenna/Cable jack on the back of the VCR. Connect the cable service wire to the VCR, Connect other wires according to the diagram to the Hght. After all connections are complete, ptug in the W.
  • Page 13 Locate the S-Video out port on the DVD or VCR. Connect an S-Video cable between DVD prayer and S-Video In on the TV. Make R - L Audio connections as indicated to the right. After all connections have been made, select the SoVideo source to display the DVD image on the W.
  • Page 14 Locate the OVI out port on the RJPIOOMor DVI device. Connect a DVI cable between the _PIOOM DVI in port on the 1_¢. If required, make Audio connections as indicated the right. After all connections have been made, select the DVI source to disptay the DVI image on the TV.

  • Page 15: Power Cord Hookup

    Connect the AC power cord directly to the LCD W/Monitor. AC Power Cord Hookup The LCDTV/Nonitor is designed to operate on 120V AC power. Locate the AC Power Cord input socket on the back of the LCDW/Monitor. Insert the AC power cord connector into the AC Socket on the TV as shown betow.
  • Page 16 Using the _ront control panel to operate the LCD llJ/Monitor. Power/Standby Indicator GLowsred in Standby mode. GLowsgreen when the TV is turned on. GLowsorange in SLeepTimer and/or ALarm mode. Remote TV Operation Press the POWERbutton to turn the LCDTV/Non]tor on from standby mode.

  • Page 17: Other Menus And On-Screen Displays

    Descriptions of the menus and on-screen displays. Menu Name Page Description ON-SCREENMENUS CHANNEL MENU Adjusts the basic operational features of the TV. Auto Program AutomaticaLLy finds and stores active channeLs to scrolL through using ChanneLUp/Down. Channel List ManuaLLypicks and chooses which active channets wiLLappear when using Channel Up/Down. Channel Label LabeLs the channels with their network names (ABC, CBS, HBO, etc.).
  • Page 18 Use the remote keys indicated below to access these menus and displays. In this manual, the OSD (On Screen Displays shown) may be different than those on the actual 11/. The following are generic examples to _£amiliarize you with the 17s options....
  • Page 19 A list of the keys and their functions on the user remote contro! supplied with the LCD TV/Monitor. MUTE Turns sound Off and On, white the picture remains. POWER T¢/AV Iums TV On or Off. Displays a menu of art avai[abte hlput GUIDE sources, Use to v_ew DTV program information.

  • Page 20: Number Keypad

    A brief list of the keys on the optional instaUer's remote and what they do. CC (Ctosed Captioning) Press to access dosed captions. FLASHBK (Flashback) Returns to the previous charmer viewed. POWER Turns TV On or Off. Turns sound Off and On, while the picture TV/FM remains.
  • Page 21 Use Auto Program to automatically j_nd and store all of the channe_ available in the selected Tuning Band. *Netes: Tuning Band must be set be_bre doing the channel search. See h_staUer menu i_em 003 Band/AEC D_ault setting is t, for' CATV. When Auto Program is run, any assigned channel labels are automaticaUy removed.
  • Page 22 After the channel search, remove unwanted channels. Removing unwanted channels Review the channets found, you may remove unwanted channels. Press the MENU button, Then use theA _I'AD3 buttonto select t heChannel menu, thenpress theOK (Enter) button, UsetheA iT AD3 buttonto hightight C hannelList, then press the OK (Enter) button.

  • Page 23: Channel Labels Setup

    Note: [f you add channel labels to existing channels, then re-run Auto Program, the [abeg will at[ be deleted. Channel Labels Setup Channel Labels he[p the user identify the channel or network being v]ewed. [n the Setup menu with the Channel. labe_ option highlighted, use the AD3 Left/Right arrow to scroU through the available channel _beg, such as,...
  • Page 24 I __ii[_ t,11 il ii[_ii,'[_t i ii it_i,.'lil - Use the iI _T x_il _I_AD3 buttons to set the year, month, day, hours and minutes. Press the MENU buttonand then usetheA IT AD3 button to highlight theSetup menu. Pressthe OK (Enter) button to highlight Time.
  • Page 25 - If you select auto time setting, time will be set from the digital broadcast information. Press the MENU button and then use the A _T AD3 button to highlight the Setup menu, Press the OK (Enter) button to highlight Time. Press the OK (Enter) button to highlight Clock.
  • Page 26 DayUght Saving InstaUer can elect touse Daylight Savings to adjust theclock h'me. This is operated from the Automatic Time Settings. Pressthe MENU button and then use the A iv ADJ button to highlight the Setup menu. Pressthe OK (Enter) button to highlight Time. Press the OK (Enter) button to highUght...

  • Page 27: Menu Language

    Choose o language _r the on-screen menus. Press the MENU buttonand then usetheA _V AD3 button to highlight the Setupmenu. Press the OK (Enter) button. Use the Down ADJ arrowto highlight N enu Languageand press the OK (£nter) button. Use the ADJ Up/Down/Left/Right a rrows to highLight and setthe Menu Language: EngLish, S panishor French.
  • Page 28 -This option set,s up or changes the password for blockirtg p[ogt_m ratings. Press the MENU buttonand then usetheA iv AD3 button to highlight the Setup menu. Press the OK (Enter) button. Use the Down ADJ arrowto highlight V -Chip and press the OK (Enter) button.

  • Page 29: V-Chip

    -You can bk_k programs based on' the TV program rating. Press the MENU button and then use the A _r ADJ button to highlight the Setup menu, Press the OK (Enter) button. Use the Down AD3 arrow to high[ight V-Chip and press the OK (Enter) button.
  • Page 30 -Restd_ting movi_ by their rating; Press the MENU buttonand then usetheA zV AD3 button to highlight the Setup menu. Press the OK (Enter) button. Use the Down AD3 arrowto highlight W Chip and press the OK (Enter) button. Use the Up/Down/Left/Right a rrowsbuttons to choose and setup the menu options forNPAA Rating.
  • Page 31 Press the MENU button and then use the A sT ADJ button to highlight the Setup menu. Press the OK (Enter) button. Use the Down ADJ arrow to highlight V-Chip and press the OK (Enter) button. Use the Up/Down/Left!Right arrows buttons to choose and set up the menu options for Canadian...

  • Page 32: Caption Menu

    *Note: PressingCCon the Iemoteto select a captions option will also turn dosed captions on, Press the MENU buttonand then usetheA _T ADZ]button to highUght the Caption menu. Press the OK (Enter)button. Usethe Down ADJ arrowto highUghtOn or Offand press theOK (Enter) button. Pressthe MENU button several times to remove the menus.
  • Page 33 Digital Captions only appear on digital channels, tune in a digital channel that _ actually broadcasting digital captions. *Note: Pressing CCon the remote selects a captions option, Press the MENU button and then use the A/T ADJ button to highlight the Caption menu.

  • Page 34: Sound Menu

    Set up the audio options for the end user - Match the sound mode to the program's character, Music, Movie Spor_s, or News. Press the MENU buttonand then usetheA iV AD3 button to highlight t heSound menu. Press the OK (Enter) button. With Mode highlighted, press the OK (Enter) button.
  • Page 35 Have the TVautomatically maintain the sound level between different channelS. Press the MENU buttonand then usethe& _v AD3 bu_on to highlight theSound menu. Press the OK (Enter)button. Usethe Up/Down arrowbuttonto h_gh{ight Auto VoLume, press the OK (Enter)button. Usethe 4111_AD3 buttons to choose On or Off. Press the MENU buttonseveral timesto removethe menus, - You can setdigital audiolanguage.

  • Page 36: Picture Menu

    _,Set the picture mode to the program content, e.9, Dynamic or Rlitdetc. Press the MENU buttonand then usetheA JV ADJ button to highlight the Picture menu. Press the OK (Enter) button. Use the Up/Down arrowbuttonto highlight Mode, press theOK (Enter) button. Use the_II/I_ A DJ buttons to choosea preset picture setup, When finished, press the OK (Enter) button, Press the MENU buttonseveral t imesto remove the...
  • Page 37 Press the MENU button and then use the A iv ADJ button to highlight the Picture menu, Press the OK (Enter) button. Use the Up/Down arrow button to choose Corot Temperature, press the OK (Enter) button. Use the _i/I_ AD3 buttons to choose Warm, Cool or NormaL.
  • Page 38 Following is the Commerciat Mode Operation Setup. Operating Ins_|[er Menu To set up the controls for the TV you will need to know how to enter the L26W56XA Insta|ler menu and make changes to the default values as required. If necessa_, familiarize yourself with...

  • Page 39: Commercial Mode Setup

    This page provides an overview of the TV configuration. See the pages listed below for more specific, detailed instructions at each step; how to access and use the InstaUer menu etc. *Note/: Disconnect all Aux inputs. Under certain conditions, Auto Program (Channel search,) is disabled if there is an Aux input active.
  • Page 40 Connections fortheLT2002 Crone Programmer to Learn t heL26W56XA Master TV Setup. Antenna or CATV Ferrite Core (TDK, ZCAT 2035°0930) O_Se_ # Progta:m_ LT2_2 Warning: Do not use LT2002 if a LodgeNet PPV card is installed in TV or clone prograramer device wf[[ Clone Programmer damaged, Master L26W56XA...
  • Page 41 POWER, OR ENTER Since the Clone Programmer's time cannot be set directly, the current time needs to be copied from a Zenith/LG TV equipped with M.P.I. input capability. After the time is copied to the CLone programmer, the current time can then be transferred to another TV.
  • Page 42 Connections for the LT2002 to Teach another L26W56XA the Master Setup "1" Antenna or CATV Crone Programmer Master L26W56XA CLONE SELEC_'I©N MENU (i_) LF_ARN FRO_ (2) TEACH TO TV (3) SET OLONE CL_ FROM TV Teach Master L26W56XA's Setup to the target (4) _"[' TV CLOCK¸...
  • Page 43 Use the Installers Menu to set up or change operational settings. See more detailed descriptions of the Installer menu items on the following pages... Accessing the Instatter's Menu Make sure TV is on. Insta[[er's menu items can be accessed by using an installers remote control Just press MENU repeatedly (at [east 10 times) unlit the TV seems to stop responding, then press 9, 8, 7, 6, then ENTERto access the Installers...
  • Page 44 Installer Menu Items 035 through 117 Menu Item Function Vatue Range Defautt Vatue Brief Description Function and Comments COMPPORT EN. O / i Set to i to enabLe HDMI. Set to 0 to disabLe. YPrPb EN. O / i Set to i to enabLe display panel Component...
  • Page 45 Detailed Descriptions of Installer Menu Items 005 - CHAN LOCK (Channel Lock) CHAN LOCKis ideal if the system must always be on the same 000 -INSTALLER SEOUENCE channeL. Changing channels with Channel Up/Down or keypad numbers is impossible. Channel Lock is inactive if set to 0 (defauLt). Specifies ent_ sequence to the Installer Menu.
  • Page 46 (Continued from previous page) 030 - ACK MASK The value range is 0 to 63, with 63 as the default, which gives the user the full range of volume control if item 008 MIN VOLUMEis M.P.I. Communication Parameter. Leave at default setting unless also set at O.
  • Page 47 Detailed Descriptions of Installer Menu Items 053 - DIS. CH-TIME (Disable Channel-Time) 081 - UPN LSB (UPN Least Significant Byte) Set to 1 to disable the Channel-Time display, ChanneL-Time display User programmable number, Least significant byte readable by M.P.I. command. Not [inked to serial number. will not appear.
  • Page 48 (Continued from previous page) 094 - 102 - ATSC BAND SAP MENU EN (2nd Audio Program) Set to 1 to enable SAP feature, if avaiLabLe. Sets up TV to receive different types of incoming signals: Set to 0 to disable SAP feature. O=Broadcast, I=CATV, 2=HRC, 3=IRC, 4=Same as NTSC.
  • Page 49 Clonable Menu Features Channel Picture Sound Setup Caption Auto Program (Active Mode Mode Time On!Off channets found with Contrast Trebte Crock AnaLog Mode the channe[ search) Brightness Bass Auto Off Digital Mode Channe[ LabeLs CoLor BaLance V Chip Digital Font Option Channe[ List Sharpness Auto VoLume...
  • Page 50 Adding Channel [cons and Labels in the 2-5-4 + Menu Mode Editlng/Addlng Channel [CONs and/or Labels Editing and adding the [abeLs can only be done if there are If there is no pre-assigned ICON, you can make a channei [abel of up charmets entered into the L26W56XA's channel map either by to 7 characters to help in idenfifving the channel or network...
  • Page 51 IMPORTANT INSTALLER SETUP INFORMATION! PLEASE READ THE FOLLOWING... adding channel icons or channel labels are not correctly added, then enter the L26W56XA InstalLer menu and make changes to the cloned L26W56XAs TVs will all have problems. To set up a master TV you will need to know how to the default values as required.
  • Page 52 Procedure to Check Software Version The software version of the L26W56XA may be checked by accessing the INSTALLERMENU. To do this, press the MENU button at [east 10 times until the menu display ceases to respond to MENU key presses. Then, press "9", "8", "7", "6", "OK (Enter/Setect)".
  • Page 53 The CAi_PORTAuto Sense function is enabled when: CAMPORT (Front Video) Functionality Control 1. InstaLLer Menu Item 34, CAMPORTEN is set to 1 AND Item 34 Item 40 Front Video 2. InstaLLer Nenu Item 40, AUTOCANPORTis enabled (1). CAMPORTEN AUTO CAMPORT Operation DisabLed SeLectabLe=Can be accessed with TV/AV key, direct access, etc.
  • Page 54 L26W56XA Aux Input Configuration ENABLE MPI DATA MPIDATA DATA STATUS DATA DIRECT ACCESS STATUS L26W56XA STATUSTYPE TYPE OxD2 STATUS Tuning Installer Menu O_ISOURCES CURRENT TYPE OXOD SOURCE ENABLED (_W) SOURCE ASSIGNMENT SOURCE OLD_OCV OLD_OCV Source Input Source Mode Number Labeling Value Labeling Value...
  • Page 55 Some quick and easy tips to resolving problems Symptoms PossibLe Cause(s) PossibLe SoLution(s) See Page(s) Power No Power. See troubleshooting FLow chart. Display Panel Picture No Picture. • DispLay panel is turned off. -Turn TV on. -Power failure? 9_11 • Antenna/CabLe not connected.
  • Page 56 card is installed in TV or clone programmer will be Warning: Do not use LT2002 while a LodgeNet PPV damaged. Note The LT2002 programmer is designed to be used with TVs con- Reset CLone After Static Shock taining the 221-01006 and Later processors. Use with earlier TV After replacing exhausted batteries, or if the programmer sets may give unpredictable results.
  • Page 57 Quick Check Controller Plug Press 'POWER' or 'ON/OFF' [ into AC Power Outlet key on TV 1. Bad TV Press 'POWER' or 'ON/OFF' or 'VOLUME UP/DOWN' or 'MUTE' key on Remote LEO .No 1.Bad TV Cycle the power by removing and re-connecting the AC power cord.
  • Page 58 Press the "On/Off" on the front panel. The On/Off key is always operational. you get Bad TV I ,..I I '_etOoI Go to Installer menu by pressing "MENU" until the TV stops responding. TV is in Stopped Commercial responding Mode.
  • Page 59 A list of deJ_'nitions for some of the words found in this guide 75 OHM RF CABLE DIGITAL TELEVISION OUTPUT The wire that comes from an off-air antenna or High-resolution, cinema-quality t elevision Refersto the outputjackthatsends a signal cable service provider. The end Looks Like a signals transmitted digitally.
  • Page 60 Quick Setup Guide for Integrated Master See table of contents for more _nforma_on. Setup Instructions for Making a Master TV i, Connect TV to skjna[ source, connect power cord and turnIV power on, 2, Enter the '[V i_taL[or menu, *Note: f_f tMs i_ not a ni_ setup, set fnstoUer item 117 to 00I ond pre_ Enter to reset TV to de/oult condition.
  • Page 61 PAGE...
  • Page 62 PAGE 62...
  • Page 63 PAGE 63...

  • Page 64: Owner's Responsibility

    You might avoid a service caLL For Customer Support/Service PLeasecaLL: 1-888-865-3026 www.zenith.com www.tgcommerciaLcom Marketed arid Distributed in the United States by LG ELectronics U.S.A., Inc. 2000 Mit[brook Drive, LincoLnshire, IL 60069. P/NO : 3350GDKMOOO4A _' Copyright 2007 LG ELectronics U.S.A., Inc.

This manual is also suitable for:

L26w56baL26w56wa

Table of Contents