Zenith L26W56SA Installation And Operating Manual page 44

Installer Menu Items 035 through 117
Menu Item Function Vatue Range Defautt Vatue Brief Description of Function and Comments
035 COMPPORT EN. O / i
1
Set to i to enabLe HDMI. Set to 0 to disabLe.
038 YPrPb EN. O / i 1 Set to i to enabLe display panel Component i input jacks.
039 REAR AUX EN O / i 1 Set to 1 to enable display panel Video 1 input jack,
040 AUTO CANPORT O / 1 1 Set to 1 to automaticaLLy switch to Eamporc.
046 STRT AUX SRCE I ~ 7, 255 255 Sets the starting AUX source.
047 AUX STATUS O / 1 0 Set to 1 for M.P.I. AUX source to be reported as a channeL number instead of Channel O.
053 DIS. CH-TIME O / i 0 Set to 1 to disabLe ChanneL-Time display.
069 EN. CH-T COL. 0 / 1 1 Set to 1 to enable custom color for the Channel-Time display.
070 FOR. EH-TIME O ~ 7 2 Chooses custom foreground color for the ChanneL-Time dispLay.
071 BCK. EH-TIME O ~ 7 2 Chooses custom background color for the ChanneL-Time display.
073 CH NOT AMBLE O / i 0 If set to 1 and channel override is O, "NOT AVAILABLE" message is displayed
when directLy accessing a channel not in the favorite channeL List.
075 REVERT EH O / i 0 If set to 1 and Loss of N.P.I. communication occurs, TV tunes to Start ChanneL.
078 UPN MSB 0 ~ 255 0 User programmable number, most significant byte.
079 UPN MSB-1 0 ~ 255 0 User programmable number, most significant byte - 1.
080 UPN MSB-2 0 ~ 255 0 User programmable number, most significant byte - 2.
081 UPN LSB 0 ~ 255 0 User programmable number, Least significant byte.
082 CHKSM ERROR 0 / 1 1 Enforces rigid N.P.I. checl<sum.
083 HANDSHK TIME O ~ 5 5 ReLaxes M.P.I. timing to be compatible with PC based Windows-controEed systems.
084 PERMANENT BLK 0 / 1 0 Removes block hours setting for Parental Control and makes block permanent.
087 REAR RGB EN. O / i
I
EnabLes RGB1 input. Set to 1 to enable, setto O to disable.
088 EN NOISE NUTE 0 / 1 1 If set to 1, mutes audio if no signal is present.
ogo KEY LOCK 0 / 1 0 If set to 1, keyboard is Locked out, IR is stiLL functionaL.
091 YPrPb2 EN. O / 1 1 Set to 1 to enabLe Component 2 input jacks.
092 RGB? FNABI F 0 ~ 2 ? Fnabl_ Video 3 input. Set to 1 far Eompo_ite Video or ? far S-Video. Set to 0 tn disable.
093 RJP AVAILABLE O / 1 0 Set to 1 to enable.
094 SAP MENU EN O / 1 1 Set to O to disable feature on Function menu. Set to 1 to enable feature on Function menu.
096 DEF. ASP. RATIO O, 1, 2, 4, 5 2 Sets default aspect ratio at power up. See detailed descriptions and item 106.
102 ATSC BAND O - 4 4 SeLects ATSC band.
103 ATSC TUNE MODE O / 1 1 Sets ATSC tuning mode. Set to O for virtual channels, set to i for physical channels.
104 START MINOR CH 0 ~ 255 0 SeLects Minor sta_ channeL. Set O for NTSE. Not O, sets Minor channel number.
106 ASP RATIO LOCK O / 1 0 To retain set aspect ratio on power cycLe, set to 1. Set to 0 for defauLt ratio on power cycle.
107 BANNER SELECT N/A N/A Not appLicabLe.
116 VIDEO MUTE EN O / i 0 Set to 0 for normaL, set to 1 for BLank.
117 FACT DEFAULT O / 1 0 O=NormaL 1=Loads factory default presets of aLL above settings.
PAG E 44