Download
Share
Print this page
Zenith L20V54S Installation And Operating Manual
  1. Manuals
  2. Brands
  3. Zenith Manuals
  4. Monitor
  5. L20V54S and
  6. Installation and operating manual

Zenith L20V54S Installation And Operating Manual

Lg
Hide thumbs

Advertisement

Quick Links

Download this manual
Installation
and
Operating
Guide
I Warranty
Model
Number
I L20V54S
I LCDTV/Monitor
].
table
of
contents
instaLLer quick setup guide
zenith
Zenith and the Lightning Z Logo are registered
©
Copyright
2007,
LG Electronics
U.S.A.,
Inc.
trademarks of Zenith ELectronics Corporation

Advertisement

loading

Related Manuals for Zenith L20V54S

Summary of Contents for Zenith L20V54S

  • Page 1 Installation Operating Guide I Warranty Model Number I L20V54S I LCDTV/Monitor table contents instaLLer quick setup guide zenith Zenith and the Lightning Z Logo are registered © Copyright 2007, LG Electronics U.S.A., Inc. trademarks of Zenith ELectronics Corporation...
  • Page 2 The model and serial number of this LCDW/Monitor are located on the back of the cabinet. For future reference, 1-888-865-3026 we suggest that you record the serial number here: MODELNO.L20V54S www.zenith.com www.lgcommerciaLcom SERIALNO. CAUTION CAUTION: TO REDUCE THE RISKOF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLEPARTS INSIDE. REFERTO QUALIFIED SERVICEPERSONNEL.
  • Page 3 CAUTION: Do not attempt to modify this product in any way without written authorization from Zenith ELectronics Corporation. Unauthorized modification could void the user's authority to operate this product. COMPLIANCE: The responsible party for this product's compliance LG ELectronics U.S.A., Inc.,...
  • Page 4 i. Read t hese instructions. 2. Keep t hese instructions. 3. Heed a LL warnings. 4. FoLLow aLL instructions. 5. Donotuse thisapparatus near w ater. 6. CLean onlywithdrycloth. 7. Donotblock any ventilation openings. InstaLL in accordance withthemanufacturer's instructions. 8. DonotinstaLL near a nyheat s ources such asradiators, heat r egisters, stoves, orother a pparatus (incLuding amplifiers) that produce heat.
  • Page 5 LT2002 Quickset II CLone Programmer - both are shown and described in Later sections. See your Zenith/LG dealer if you wish to purchase the InstaLLer remote and LT2002. The instaLLer remote aLLowsaccess to the InstaLLer menus, User menus, and Channel Banks in the Manual Channel Set options on the Setup menu.
  • Page 6 • Unpack the LCD W/Monitor and aLL need a clone programmer. Is there a accessories. • Set up InstatLer's remote controL, see Zenith LT2002 Clone Programmer page lg. avaiLabLe? • Determine instaLLation Location for the LCD W/Monitor, TV stand or mount.
  • Page 7 To hook up source equipment, see below and also refer to the Table of Contents on page 5; shows pages to go to for equipment hookup options. Used to select speaker output. *Note: If Pillow Speaker is selected, no Sound will be heard from TV speakers.
  • Page 8 VESA Standard lOOmm TV Mounts and Stands Following are shown some examples of VESA standard 100 mm mounts. Since there are numerous types of stands and mounts available, only a few are shown here. Refer to the instructions provided with the TV stand that will be used to mount the TV.
  • Page 9 Connections Pane[ A 300 to 75 ohm adapter is not included with Zenith LCD TV/Monitor. RFCoaxial Wire (75 ohm) 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. Each end looks like a hex shaped...
  • Page 10 Connect cable service to the LCD Ill/Monitor. Locate the Antenna/CaNe jack on the back of the TV. Connect the cable wire to the Antenna/CaNe jack according to one CaNe TV of the diagrams to the right. Wait Jack After at[ connections are comptete, ptug in the TV.
  • Page 11 Connect antenna and a VCR to the LCD TV/Monitor. Locate the Antenna/CabLejack on the back of the VCR. Connect the antenna wire that runs from the waLLjack to the VCR. Connect other wires according to the diagram to the right. After aLLconnections are complete, •...
  • Page 12 Connect cable service and a VCR to the LCD TV/Monitor. Locate the Antenna/Cabte jack on the back of the VCR. Connect the cable service wire to the VCR. Connect other wires according to the diagram to the right. After aLLconnections are complete, plug in the TV.
  • Page 13 Pillow speaker not included with LCD TV/Monitor Controlling the TV with Serial Data The TV is capable of being controLLed by a sing[e-wire, serial data signaL. This is a Zenith patented technology and is being implemented by certain brands of "smart"...
  • Page 14 Connect the AC power cord directly to the LCD TV/Monitor. AC Power Cord Hookup The LCD TV/Monitor is designed to operate on 120V AC power. Locate the AC Power Cord input socket on the back of the LCD TV/Monitor. Insert the AC power cord connector into the AC Socket on the TV as shown below.
  • Page 15 Using the front control panel to operate the LCD TV/Monitor. Power / Standby Indicator GLows red in Standby mode. GLows green when the TV is turned on. GLows orange in SLeep Timer Remote Control Sensor and/or ALarm mode. _I@@ @@I_ TV/AV MENU TV Operation...
  • Page 16 Descriptions of the menus and on-screen displays. Menu Name Page DescripUon ON-SCREEN MENUS CHANNEL MENU Adjusts the basic operational features of the TV. Auto Program AutomaticaLLy finds and stores active channels to scroLLthrough using Channel Up/Down. Channel List ManuaLLypicks and chooses which active channels wilt appear when using Channel Up/Down Channel Label LabeLs the channels with their network names (ABC, CBS, HBO, etc.).
  • Page 17 Use the remote keys indicated below to access these menus and displays. In this manual, the OSB (On Screen Bisplays shown) may be different. The following are just generic examples to familiarize you with the TVs options. Volume Display Sleep Timer Menu SAP Display Press VOLUME.
  • Page 18 A brief list of the keys on the optional patient remote control and what they do. CC (Closed Captioning) FLASHBK(Flashback) Press to access dosed captions. Returns to the previous channel viewed. POWER MUTE Turns TV On or Off. Turns sound Off and On, while the picture remains.
  • Page 19 A brief list of the keys on the optional installer's remote and what they do. MUTE POWER Turns TV On or Off. Turns sound Off and On, while the picture remains. GUIDE Use to view DTV program information. BANK Press and repeat to select a Channel Press to activate English subtitles.
  • Page 20 Use Auto Program to automatically find and store all of the channels available in the selected Tuning Band. *Note: Tuning Band must be setbefore doingthechannel search. See Installer menu item003 Band/AFC. Default setting isi, forCAW. When Auto Program is run, any assigned channel labels are automatically removed.
  • Page 21 A_ter the channel search, remove unwanted channels. Removing unwanted channe[s Review the channels found, you may remove unwanted channets. Press the MENU button. Then use the AD.1• 1T button to select the Channel menu, then press the OK (Enter) button. Use the AD3 •/T button to highlight Channel List, then...
  • Page 22 *Note: If you add channel labels to existing channels, then re-run Auto Program, the labels will all be deleted. Channel LabeLs Setup Channet Labets hetp the user identify the channet or network being viewed. In the Setup menu with the Channel Labels option highlighted, use the ADJ Left/Right arrow to scroll through the available channel [abets, such as, A&E, ANC, ESPN,HBO,etc.
  • Page 23 - Use the•/T/_/I_ ADJ buttons to set the year, month, day, hours and minutes. Press the MENU button and then use the ADJ •/T button to hightight the Setup menu. Press the OK (Enter) button to hightight Time. Press the OK (Enter) button to highlight Crock.
  • Page 24 - If you setect auto time setting, time will be set from the digital broadcast information. Press the MENU button and then use the ADJ •/, button to highlight the Setup menu. Press the OK (Enter) button to highlight Time. Press the OK (Enter) button to highlight...
  • Page 25 Day[ight Saving Installer can elect to use Daylight Savings to adjust the clock time. This is operated from the Automatic Time Settings. Press the MENU button and then use the AD3 •/T button to hightight the Setup men. Press the OK (Enter) button to hightight Time. Press the OK (Enter) button to hightight Crock.
  • Page 26 Choosea language for the on-screen menus. Press the MENU button and then use the AD3 •/T button to highlight the Setup menu. Press the OK (Enter) button. Use the Down ADJ arrow to highlight Menu Language and press the OK (Enter) button.
  • Page 27 -This option sets up or changes the password for blocking program ratings. Press the MENU button and then use the ADJ •/T button to high{ight the Setup menu. Press the OK (Enter) button. Use the Down ADJ arrow to high{ight V-Chip and press the OK (Enter) button.
  • Page 28 -You can block programs based on the TV program rating. Press the MENU button and then use the AD3 •/T button to highlight the Setup menu. Press the OK (Enter) button. Use the Down ADJ arrow to hightight V-Chip and press the OK (Enter) button.
  • Page 29 -Restricting movies by their rating. Press the MENU button and then use the ADJ •/_f button to highlight the Setup menu. Press the OK (Enter) button. Use the Down ADJ arrow to hightight V-Chip and press the OK (Enter) button. Use the Up/Down/Left/Right arrows buttons to choose and set up the menu options for MPAA Rating.
  • Page 30 Press theMENU b utton andthenuse the ADJ •/T button to highlight the Setup menu. Press the OK (Enter) button. Use the Down ADJ arrow to highlight V-Chip and press the OK (Enter) button. Use the Up/Down/Left/Right arrows buttons to choose and set up the menu options for Canadian English Rating.
  • Page 31 *Note: Pressing CCon the remote to select a captions option will also turn closed captions on. Press the MENU button and then use the AD3 • i• button to highlight the Caption menu. Press the OK (Enter) button. Use the Down ADJ arrow to highlight On or Off and press the OK (Enter) button.
  • Page 32 Digital Captions only appear on digital channels, tune in a digital channel that is actually broadcasting digital captions. *Note: Pressing CCon the remote selects a captions option. Press the MENU button and then use the ADJ •/_' button to highlight the Caption menu. Press the OK (Enter) button.
  • Page 33 Set up the audio options for the end user _71?_1i_tT_r_ _'r4TT I, _ - Match the sound mode to the program's character, Music, Movie, Sports, or News. Press the MENU button and then use the AD$ •/V button to highlight the Sound menu.
  • Page 34 I _TI"__ ll-+'_'l'G 111 roll [,_ [:._'_ __,i[,,++-i - You can set digital audio language. Press the MENU button and then use the ADJ •/!v button to hightight the Sound menu. Press the OK (Enter) button. Use the Up/Down arrow button to hightight Mufti-Track, press the OK (Enter) button.
  • Page 35 Set the picture mode to the program content, e.g. Dynamic or Mild etc. Press the MENU button and then use the AD3 •/V button to highlight the Picture menu. Press the OK (Enter) button. Use the Up/Down arrow button to highlight Mode, press the OK (Enter) button.
  • Page 36 Press theMENU b utton andthenuse the AD3 •/T button to highlight the Picture menu. Press the OK (Enter) button. Use the Up/Down arrow button to choose CoLor Temperature, press the OK (Enter) button. Use the _1/1_ AD,1 buttons to choose Warm, Coot or NormaL.
  • Page 37 The TV has four channel banks, where the administrator or installer can store groups of TV channels. PLANNING THE CHANNEL BANKS ADDING/DELETING CHANNELS GeneraLLy,TV channels are grouped into "program packages" A previously p reparedprogramming chartishelpfuL. with terms that are proposed to the end user. The user then i.
  • Page 38 Examples of typical channel banks chars j_'lled in Figure 1. Typical channel banks after running Auto Program B Purpose Channet Number 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 A = Active - -Channet was found during AUTO PROGRAM Figure 2.
  • Page 39 PLAN YOUR CHANNEL BANKS BY FILLING IN THESE CHARTS (or use photocopies) B Purpose Channel Number Purpose Channel Number Purpose Channel Number Purpose Channel Number 99 100 Purpose Channel Number 101 102 103 104 105 106 107 108 109 ii0 112 113 114 115 116 117 118 119 120 121 122 123 124 125 FM PAGE...
  • Page 40 FoLLowing is the CommerciaL Mode Operation Setup. I_+[o_V_._ [,,.-,IN _ u[_ + I+[,..',]i f..1III I II = I:I hV+l=l+ LIJ Operating InstaLLer Menu To set up the controls for the TV you wiLL need to know how to enter [ololo] II+ [,.IIf;_ ! II:I--.1 [.1:[+] [ololo] the L20V54S InstaLLer menu and make changes to the default values...
  • Page 41 This page provides an overview of the TV configuration. See the pages Listed below for more specific, detailed instructions at each step; how to access and use the InstaLLer menu etc. *Note I: Disconnectall Aux inputs. Under certainconditions, Auto Program (Channel search) is disabled if there is an Aux input active.
  • Page 42 Connections forthe LT2002 CLone Programmer to Learn t he L20V54S Master TV Setup. FT", i° Antenna or CAW Ferrite Core (TDK, ZCAT 2035-0930) QuickSet II Programmer L T2002 if a LodgeNet PPV card is insta[[ed in TV or done Warning: Do not use LT2002 programmer device wi[[ be...
  • Page 43 ITEM, PRESS ON/OFF, POWER, OR ENTER Since the Clone Programmer'stime cannot be set directly, the current time needs to be copied from a Zenith/LG TV equipped with M.P.I. input capability. After the time is copied to the Clone programmer, the current time can then be transferred to another TV.
  • Page 44 Connections fortheLT2002 to Teach a nother L20V54S theMaster Setup ; "?_ite n na "T" or CATV QuickSet II Programmer LT2002 Master L20V54S CLone Programmer CLONE SELECTION MENU (1) LEARN FROM (2) TEACH TO TV (3) SET CLONE CLOCK FROM "f_/ Teach Master L20V54S's Setup to the target (4) SET TV CLOCK FROM...
  • Page 45 Use theInsta[[er's Menu t o setupor change o perational settings. See more detailed d escriptions oftheInstaller m enu i tems onthefollowing p ages... Accessing the InstaUer's Menu Make sure TV is on. Instatter's menu items can be accessed by using an instatter's remote control.
  • Page 46 Installer Menu Items 035 through Menu Item Function Va[ue Range Defau[t Va[ue Brief Description Function Comments COMPPORT EN. 0 / i Set to 1 to enable HDMI. Set to 0 to disable. REAR AUX EN 0 / i Set to i to enable display panel Video i input jack.
  • Page 47 Detai[ed Descriptions of Insta[[er Menu Items 005 - CHAN LOCK (Channel Lock) CHAN LOCKis idea[ if the system must always be on the same channel Changing channels with Channel Up/Down or keypad 000 -INSTALLER SEQUENCE numbers is impossible. Channel Lock is inactive if set to 0 (default).
  • Page 48 The v atue r ange is0to63,with63as thedefautt, which g ives t he FEATURE LEVEL user thefu[[range ofvolume control if item 008 MIN VOLUME Defautt set to ZEN 1 for Zenith IR remote controt opera- also setatO. C hange values with ADJ Left/Right arrow keys. It may tion.
  • Page 49 Detailed Descriptions of Installer Menu Items 039 - REAR AUX EN. (Rear Aux Enabie) 079 - UPN MSB-1 (UPN Most Significant Byte-l) Set to 1 to enable display pane[ rear AUX (Video 1) input. User programmable number, most significant byte-1 readable by M.P.I.
  • Page 50 (Continued from previous page) 107 - BANNERSELECT 103 - ATSC TUNE MODE Not applicable. Selects ATSCtuning mode: O=Virtuat, 1=Physical. *Note: The setting above is ignored if Installer item 102 ATSC BAND, is set to I=CATV, 2=HRC, or 3=IRC. Then 103 - ATSC TUNE MODE 116 - VIDEO MUTE EN (Video Mute Enable) Set to 0 for normal.
  • Page 51 Adding Channe[ Icons and Labets in the 2-5-4 + Menu Mode EdiUng/Adding Channet [CONs and/or Labets Editing and adding the [abets can only be done if there are If there is no pre-assigned ICON,you can make a channel [abet of up channels entered into the L20V54S'schannel map either by to 7 characters to help in identifying the channel or network.
  • Page 52 IMPORTANT INSTALLER SETUP INFORMATION! PLEASE READ THE FOLLOWING... adding channel icons or channel labels are not correctly added, then the cloned L20V54SsTVswill all have problems. enter the L20V54S Installer menu and make changes to To set up a master TV you will need to know how to the default values as required.
  • Page 53 Procedure to Check Software Version The software version of the L20V54S may be checked by accessing the INSTALLER MENU. To do this, press the MENU button at [east 10 times until the menu display ceases to respond to MENU key presses. Then, press "9", "8", "7", "6", "OK (Enter/Select)".
  • Page 54 L20V54S Aux Input Configuration ENABLE MPI DATA MPI DATA DATA STATUS DATA DIRECT ACCESS STATUS L20V54S STATUSTYPE TYPE OxD2 STATUS Tuning Installer Menu 0x41 SOURCES CURRENT AV TYPE OXOD SOURCE ENABLED (RAN) SOURCE (R) ASSIGNMENT SOURCE Source Input Source Mode Nurnbel Labeling Value...
  • Page 55 Some quick and easy tips to resolving problems Symptoms Possible Cause(s) Possible Solution(s) See Page(s) Power No Power. See troubleshooting flow chart. Display Panel Picture No Picture. • Display pane[ is turned off. -Turn TV on. -Power failure? • Antenna/Cable not connected.
  • Page 56 cardisinstalled inTVorclone programmer will b e Warning: DonotuseLT2002 while a LodgeNet PPV damaged. *Note: The LT2002 programmer is designed to be used with TVS Reset Crone After Static Shock con-raining the 221-01006 and later processors. Use with earlier After reptacing exhausted batteries, or if the programmer behaves TV sets may give unpredictable results.
  • Page 57 Quick Controller Check Plug into AC I Press 'POWER' key on TV or 'ON/OFF' Power Outlet TV Turn 1. Bad TV Press 'POWER' or 'ON/OFF or 'VOLUME UP/DOWN' 'MUTE' key on Remote _Red ,,,No 1. Bad PPV Board. 2. Bad DTV Board. N No 1.
  • Page 58 Press the "On/Off" on the front panel. The On/Off key is always operational. you get Bad TV Leave TV set On Go to Installer menu by pressing "MENU" until the TV stops responding. TV is in Stopped Commercial responding Mode. I tr°spon d TV is not in Commercial Mode Call Technical Support for...
  • Page 59 A list of definitions for some of the words found in this guide 75 OHM RF CABLE DIGITAL TELEVISION OUTPUT The wire that comes from an off-air antenna High-resotution, cinema-quality tetevision Refers to the output jack that sends a signal cab[e service provider.
  • Page 60 Quick Setup Guide for Integrated Master TVs See table of contents for more information. WaLL Jack Antenna (75ohm) Setup Instructions for Making a Master II_.[&vi..'_ !_."]1 " :, i [_] II_[,,.'It IL, I i! il =1-th'rfl =1_ LO] 1. Connect TV to signal source, connect power cord and turn TV power on.
  • Page 61 PAGE...
  • Page 62 PAGE...
  • Page 63 PAGE 63...
  • Page 64 LCD W/Monltor WeLcome to the LG family! We beLieve that you wilt be pleased with your LCD TV/Nonitor. PLease read this warranty carefully, it is a "LIMITED WARRANTY" as defined under Federal Law. This warranty gives you specific Legal rights,...