Recording; Normal Recording; Skipping Unwanted Scenes During Recording - Zenith TVSC1320 Operating Manual & Warranty

RECORDING
Make sure:
• TV/VCR power must be turned on.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the
tape to the point you want to begin recording.)
You can ONLY watch the same TV program
that is being recorded.
Press the number buttons on r
the remote control or the [
CHANNEL UP or DOWN |
button. P
Remember: If the TV/VCR is
connected to a cable box or
satellite box, the TV/VCR must be on CH3 or
CH4.
Then the channel to be recorded must be
selected on the cable box or satellite box.
Press the PAUSE/STILL button to temporarily
stop recording.
r
PAUSE
Press the PAUSE/STILL or /
-/ REC(ORD) button to resume_
r
CH 10
recording. /
NOTE: / sp
• After five minutes, the
TV/VCR will automatically switch to the
Recording mode to prevent tape damage.
• If "CLOSED CAPTION [ON]" is selected, the
On-Screen Display will appear for 5 seconds,
then disappear.
Press the SPEED button to
select the desired tape
speed (SP/SLP).
SP
i 5! / _!_ i
Press the REC(ORD)
button.
REC
[, SP
Press the STOP button when recording is
completed.
- 25 - EN
9K16