Set Up For Use; Channel Set Up For The First Time; Deleting (Or Adding) Channel - Zenith TVSC1320 Operating Manual & Warranty

SET UP FOR USE
CHANNEL MEMORY PROGRAMMfNG
Use this feature to program the TV/VCR tuner to scan and memorize all the channels you receive in
your area.
You can use this feature to memorize cable channels only if your cable system connects directly from
its wall outlet to the Antenna terminal of your TVNCR. You cannot use this feature when the TVNCR
is connected to a cable or satellite box.
Plug the TV/VCR power cord into a _.'_"
standard AC outlet.
NOTE:
• If some digits appear in the corner of the
screen, press the POWER button to turn off the
set, and then press the POWER button again to
turn the set back on. This will reset the TV back
to customer mode. Do not unplug the power
cord during this reset.
Press the POWER button to turn on the TV/VCR.
The channels you no longer receive or seldom
watch can be deleted from the memory. (Of
course, you can add the deleted channel into the
memory again.)
Press the MENU button on
the remote control.
Press the PLAY or STOP
button to point to "CHANNEL
SET UP".
Then, press the EFWD
MENU
]IMER PROGRAMMING
P_CTURE CONTROL
SETTING CLOCK
_- CHANNEL SET UP
USERS SET UP
V-CHIP SET UP
LANGUAGE ENGLISH]
CAPTION [O_F]
ZERO RETURN
TIME SEARCH
button.
%* . ,
_" SET UP
• *.• •
Select "ENGLISH" or I ,-_.GOAGE
[ENGLISH] ESPANOL
"ESPANOL"=Spanish
using
I AUTO PRESET
the F.FWD or nEW button.
"[ ]" indicates the selected
language.
Press the PLAY or STOP _*NG,*GE
buttOn to point to "AUTO {_._us.i ESR_.OL
PR ES ET". _- AUTO P_ESET
Then press the EFWD
button. The tuner scans and
memorizes all active channels tn your area.
NOTES:
• The TVNCR distinguishes between standard
TV channels and cable channels.
• If you want to play or record a video tape
BEFORE presetting the tuner, you must press
the MENU button on the remote control. To
preset the tuner again, see "CHANNEL SET UP
AGAIN" on page 14.
• If reception conditions are poor, the TV/VCR
may recognize TV channels as CATV channels
or viceversa. If this occurs, try running the
AUTO PRESET again when reception
conditions are better.
The tuner stops on the lowest memorized channel.
If you want to recall the selected channels, you
can select the desired channel directly with the
remote control number buttons or CHANNEL UP
or DOWN.
Press the PLAY or STOP
button to point to
"ADD/DELETE CH".
Press the F.FWDbutton.
CHANNELSETUP-
ADDIDELETE CH{TV)
AUTO pRESET
Press the PLAY or STOP
button until your desired
channel number appears. 08
(You can also use the
number buttons or the A_O_OE_ETE
CHANNEL UP/DOWN button
to enter it.)
_'_ _ ,_,_.e _or adu_ _ :,_,_ _ '_orinto i memo W
Press the RFWD or REW button. The channel
number changes to light red.
The channel is deleted from memory.
If you press the RFWD or REW button again, the
channel number changes to light blue. The
channel is added to memory again.
To delete another channel, repeat steps 3 and 4.
Press the MENU button on the remote control to
return to TV mode.
NOTE: Press the CHANNEL UP or DOWN button
to confirm that channel(s) have been deleted or
added•
-13-
EN
gK16