Search; Zero Return; Time Search - Zenith TVSC1320 Operating Manual & Warranty

SEARCH
Make sure:
• TVNCR power must be turned on.
• Insert a tape.
Use this function to mark a point on the tape that
you wish to quickly return to later.
NOTE: You cannot mark a blank spot on the tape.
• This function will not operate without a tape in
the TV/VCR.
To skip a program that is 2 hours and 50 minutes
of tape length, in either direction, from the present
tape position•
Rewind or fast forward the tape to the beginning
point you want to review.
Press the COUNTER RESET button repeatedly.
Press the REC(ORD) or PLAY button.
Press the STOP button when recording or
playback is completed.
Press the MENU button on the remote control.
Press the PLAY or STOP
button to point to "ZERO
RETURN".
Then, press the EFWD
button.
The counter will appear on
the TV screen.
MENU
TIMER pROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET Up
V.CHIP SET UP
LANGUAGE ENGLISH]
CAPTION _O_F I
,_ ZERO RETURN
TIME SEARCH
The tape will automatically stop when the counter
returns to 0:00:00.
Press the PLAY button to view tape.
This function advances the tape to a specific
position when you enter the amount of playback
time you want to skip.
NOTE:
• Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a
time.
• This function will not operate in recording mode.
Press the TIME SEARCH button (with each push
it will increase by 10 minutes).
OR
Press the MENU button on
the remote control.
Press the PLAY or STOP
button to point to "TIME
SEARCH".
Then, press the F.FWD
MENU
RMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USERS SET UP
VCHIP SET UP
LANGUAGE [Er JG_ ISHI
CAPTION OFF]
ZERO RE URN
_E SEARCH
button.
Press the PLAY or STOP
button until your desired time T,,_ES_ARC.
appears.
(Example: "2:50" stands for
2 hours 50 minutes)
If you wish to cancel the
Time Search at this point,
press the MENU button on the remote control.
Press the REW or F.FWD button.
The TVNCR will rewind or fast forward to the
specified point.
The time counts down as the searching
progresses. When 0:00 is reached, the tape will
start playback automatically.
Press the STOP/EJECT button on the TV/VCR or
the remote control, This will delete the selected
time.
- 24 - EN
9K16