RECORDING
Make sure:
• TVNCR
power must be turned on.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the
tape to the point you want to begin recording.)
You can ONLY watch the same TV program
that is being recorded.
1 Select ll_e channe;
to bt_.recorded
Press the number buttons on
the remote control or the
CHANNEL
UP or DOWN
button.
Remember:
If the TV/VCR is
connected
to a cable box or
satellite box, the TV/VCR must be on CH3 or
CH4.
Then the channel to be recorded must be
selected on the cable box or satellite box.
2
Select the tap
,zpeed
Press the SPEED button to
select the desired tape
speed (SP/SLP),
sP
CH10
!
Press the PAUSE/STILL
button to temporarily
stop recording.
PAUSE
Press the PAUSE/STILL
or
REC(ORD) button to resume
recording.
NOTE:
sP
• After five minutes, the
TVNCR
will automatically
switch to the
Recording mode to prevent tape damage.
3
Begin recording
IAEC
Press
the REC(ORD)
button.
sP
4 Stop recording
Press the STOP button when recording is
completed.
- 23 -
EN
9K16