Operating Controls And Functions - Zenith TVSC1320 Operating Manual & Warranty

OPERATING CONTROLS AND FUNCTIONS
NOTES:
• We do not recommend that you use a "universal" remote control to operate this TV/VCR. Not all of
the functions may work. Call the manufacturer of the universal remote control, not Sears, if you have
problems with it.
• Depending on your antenna system, you may need other connectors in addition to the coaxial cable
supplied with this unit. See Antenna/Cable Connections section of this manual.
- TV/VCR FRONT PANEL -
e _.
1
2 3 4 5 6 7 89 1011 12 13 14
-REMOTE CONTROL-
13
15
16
17
5
4
8
18
19
2O
'i', /
czbo
_LFEp (H*_NNEL
cb _cb ©
C_CDCD. i
C_DCZb C_
i,!, /
@' !i
25
4
24
11
12
23
6
7
22
21
1 EARPHONE jack-
Connects to earphones (not supplied) for
personal listening. The size of jack is 1/8"
monaural (3.5mm).
2 AUDIO input jack-
Connect to the audio output jack of your audio
equipment, video camera or another VCR.
3 VIDEO input jack-
Connect to the video output jack of your video
camera or another VCR.
STOP button-
Press to stop the tape motion.
EJECT button-
Press in the Stop mode to remove tape from
TVNCR.
Select the setting modes from the on-screen
menu. Press to enter digits when setting
program. (For example: Setting clock or timer
program)
5 REW button-
Press to rewind the tape, or to view the picture
rapidly in reverse during the PLAY mode.
Press to select a mode from a particular menu.
(For example: Language or user's set up)
6 PLAY button-
Press to start the PLAY mode.
Select the setting modes from the on-screen
menu. Press to enter digits when setting
program. (For example: Setting clock or timer
program)
7 F.FWD button-
Press to rapidly advance the tape, or to view
the picture rapidly in forward during playback
mode.
When setting program (For example: Setting
clock or timer program), press to determine
your selection and proceed to the next step you
want to input. Press to determine setting
modes from on-screen menu. Press to select a
mode from a particular menu. (For example:
Language or user's set up)
-9- EN
9K16