Clock Set Up (Auto / Manual) - Zenith TVSC1320 Operating Manual & Warranty

Set the clock accurately for proper automatic
timer recording• If a Public Broadcasting Station
(PBS) is available in your area, follow "AUTO
CLOCK SETTING". If there isn't one, then follow
"MANUAL CLOCK SETTING".
You can have the TV/VCR set the clock time and
date automatically via the Extended Data Service
(XDS! of your local Public Broadcasting Station
(PBS) channel.
Make sure:
• TV/VCR power must be turned on.
• Antenna connections are correct.
• Cable converter box is turned on if your
TV/VCR is connected to one.
• The channel is properly set in advance. (See
page 14.)
NOTES:
• Auto clock setting only needs to be set once.
But it can be done again if the clock's time has
become incorrect for some reason.
• If the TV/VCR is connected directly to a cable
converter box or satellite box, the local PBS
station must be selected on the cable box itself.
The TV/VCR must be set to the output channel
of the cable or satellite box (usually channel 3
or 4), to be able to,set up or correct the clock
automatically.
• The TV/VCR cannot control the channels of the
cable or satellite box.
Press the MENU button on
the remote control.
Press the PLAY or STOP
button to point to "SETTING
CLOCK".
Then, press the RFWD
button.
MENU
TIMER PROGRAMMING
PICTURE CONTROL
SETT4NG CLOCK
CHANNEL SET UP
USER S SET UP
V CHiP SET Up
LANGUAGE ENGLISH]
CAPTION [OtF}
ZERO RE_URN
rIME SEARCH
-i ,,,/_* K ' , SETTING CLOCK
I_ AUTO CLOCK [ONI
Press the F.FWD or REW _u_o C LOC_ c. laurel
button repeatedly until [ON] MANOA[ CLOCK SET
appears. Ds_ iota
Press the PLAY or STOP
button to point to "AUTO
CLOCK CH".
Then press the RFWD or
REW button until the channel
number for your local PBS
station appears.
Leave menu set to [AUTO] if you do not know the
local PBS channel number. The TV/VCR will
automatically search all available channels and
select it.
SETTING CLOCK
AUTO CLOCK [ON]
I_ AUtO CLOCK CH [AUTO'
MANUAL CLOCK S£T
O S T [OFF 1
Press the MENU button on the remote control to
return to TV mode.
Turn the TV/VCR off. The Auto Clock functions
automatically when the TV/VCR is off.
If you choose [AUTO]:
• The TVNCR must scan each channel for a
couple of seconds to determine if it is
transmitting an XDS signal.
• If the time automatically set by [AUTO] is
incorrect, it may have accessed the XDS signal
from a PBS channel outside your time zone. In
this case, you must manually enter the correct
PBS channel.
• If [AUTO] cannot locate a XDS signal, you must
set the clock manually.
- 15 - EN
9K16