Tv Operation; Watching A Tv Program; Game Mode; Picture Control - Zenith TVSC1320 Operating Manual & Warranty

TV OPERATION
Press the POWER button to turn on the TV/VCR.
Press the CHANNEL UP or DOWN button to
select your desired channel number or press the
number buttons on the remote control.
Remember: If the TV/VCR is connected to a
cable box or satellite box, the TVNCR must be on
CH3 or CH4, then the channel to be viewed must
be selected on the cable box or satellite box.
Press the VOLUME +/-
(UP/DOWN) button to adjust
the volume.
VOLUME 20
IlnllHtaHen
This function enables you to decrease the TV
screen contrast, making it better for Video games•
NOTE: This function cannot be set during recording•
Press the GAME button on
the remote control. "GAME"
appears on the screen.
When you press the GAME
button;
• The TVNCR comes on automatically if it is off.
• The TVNCR will be in external input mode
automatically.
Press the GAME button or CHANNEL UP or
DOWN button on the remote control.
The TVNCR's picture controls - BRIGHT,
CONTRAST, COLOR, TINT and SHARPNESS -
are preset at the factory. Although they are
usually the best, you may need to make some
further adjustments for a natural looking image.
NOTE:
• Procedures must be performed within 5
seconds or the Picture Control mode will be
cancelled.
• When setting the Picture Control, the Game
mode will be cancelled.
Make sure:
• TV/VCR power must be turned on.
Press the MENU button on
the remote control.
Press the PLAY or STOP
button to point to "PICTURE
CONTROL".
Then, press the EFWD button.
Press the PLAY or STOP
button until desired control is
displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
MENU k
TIMER pROGRAMMING
_- F_CTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER S SET UP
V CHIP _ET UP
IME Sf ARCH
•_ _ •i ••_ • _ _ !:
Press the F.FWD or REW button to adjust to your
desired level.
REW EFWD
BRIGHT to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
• If there is a power failure of any kind, the unit
will retain its memory for this feature.
- 18 - EN
9K16