Clock Set Up (Auto / Manual) - Zenith TVSC0902 Operating Manual & Warranty

Set the clock accurately for proper automatic
timer recording. If a Public Broadcasting Station
(PBS) is available in your area, follow "AUTO
CLOCK SETTING". If there isn't one, then follow
"MANUAL CLOCK SETTING".
AUTO CLOCK SETTING
You can have the TVNCR set the clock time and
date automatically via the Extended Data Service
(XDS) of your local Public Broadcasting Station
(PBS) channel.
Make sure:
• TVNCR power must be turned on.
• Antenna connections are correct.
• Cable converter box is turned on if your
TVNCR is connected to one.
• The channel is properly set in advance. (See
page 15.)
NOTES:
• Auto clock setting only needs to be set once.
But it can be done again if the clock's time has
become incorrect for some reason.
• If the TVNCR is connected directly to a cable
converter box or satellite box, the local PBS
station must be selected on the cable box itself.
The TVNCR must be set to the output channel
of the cable or satellite box (usually channel 3
or 4), to be able to set up or correct the clock
automatically.
• The TVNCR cannot control the channels of the
cable or satellite box.
• You cannot use AUTO CLOCK and D.S.T.
setting with the car adapter cord.
1
Select "SETTING CLOCK"
Press the MENU button on -MEN°
the remote control. TIME RPRO GRAMMING
pICTURE CONTROL
Press the PLAY or STOP _.SE'_'NG CLOCK
CHANNEL SET Up
USER'S SET UP
LANGUAGE ENGLISH}
button to point to "SETTING
ZERO RETUI_ N
CLOCK". T_ME SEA,0H
Then, press the F.FWD
button.
2
Set "AUTO CLOCK" to SErn,GCLOCK
[ON]
Ib AUTO CLOCK ION]
Press the F.FWD or REW AUTO CLOCK cH [AUTO}
button repeatedly until [ON] M*N,*L C LOCK SET
appears, os_ [OFF I
3 Enter the channel number for the PSS station
Press the PLAY or STOP
f
button to point to "AUTO /
SETTING CLOCK
CLOCK CH". _ AU_OoLOO_ [ ON]
Then press the F.FWD or | _'AU_OCLOC_OH IAUTOI
nEW button until the channel| _*NUALOLOOKSET
number for your local PBS L OST [o_
station appears.
Leave menu set to [AUTO] if you do not know the
local PBS channel number. The TVNCR will
automatically search all available channels and
select it.
4 Exit the Auto Clock Setting
Press the MENU button on the remote control to
return to TV mode.
lh_TV!VCR
Turn the TVNCR off. The Auto Clock functions
automatically when the TVNCR is off.
If you choose [AUTO]:
• The TV/VCR must scan each channel for a
couple of seconds to determine if it is
transmitting an XDS signal.
• If the time automatically set by [AUTO] is
incorrect, it may have accessed the XDS signal
from a PBS channel outside your time zone. In
this case, you must manually enter the correct
PBS channel.
• If [AUTO] cannot locate a XDS signal, you must
set the clock manually.
- 16- EN
9K16