Condensed Spare Parts List - Wolf WKG SERIES Service Manual

FULL SIZE GAS CONVECTION OVENS - CONDENSED SPARE PARTS LIST
CODE & PROBLEM
Er06 - Zone 1 A/D underflow
error
Er07 - Zone 1 A/D overflow
error
Er10 - Stack overflow error
Er11 - Open sensor error
Er12 - Shorted sensor

CONDENSED SPARE PARTS LIST

340324-8
411506-3
353613-2
353589-1
411496-F1
497269-1
497269-2
427137-2
416535-6
346357-1
424194-1
411690-1
340324-9
358516-1
424846-1
920883-3
821875-2
421758-G1
F32700 (February 2006)
PROBABLE CAUSE
• Incorrect sensor type
• Measuring temperature outside the
sensor range
Open sensor
Microprocessor malfunction
Open sensor
• Incorrect sensor type
• Measuring temperature outside the
sensor range
Part No.
Main Power Switch (On/Off/Oven Cool)
Thermostat, KX (WKG, WKGX)
Temperature Control Board (WKGD, WKGDX)
Temperature Probe (WKGD, WKGDX)
Door Switch
Gas Valve, Natural
Gas Valve, Propane
Ignition Module
Heat Relay
High Limit Thermostat
Igniter/Flame Sensor
Timer - 60 Minute
Light Switch, Roast & Hold or Fan Speed
Blower Motor, 2Sp. 120 Volt
Computer Control (WKGC, WKGCX)
Temperature Probe (WKGC, WKGCX)
SST Relay (WKGD, WKGDX)
Transformer
WKG SERIES
Description
SOLUTION
• Check the InP1 setup parameter.
Verify it matches your sensor.
• Check sensor and connections for a
reversed or open sensor. If the
condition causing the error is
resolved, the error will clear.
• Check the InP1 setup parameter.
Verify it matches your sensor.
• Check sensor and connections for a
reversed or open sensor. If the
condition causing the error is
resolved, the error will clear.
• Cycle power.
• Check sensor and connections for a
reversed or open sensor.
• Check the InP1 setup parameter.
Verify it matches your sensor.
• Check sensor and connections for a
reversed or open sensor.
• Check the InP1 setup parameter.
Verify it matches your sensor.
• Check sensor and connections for a
reversed or open sensor.
Printed in U.S.A.