Clearing A Staple Jam; Staple Jam In The Finisher - Kyocera TASKalfa 650c Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE

Clearing a Staple Jam

When a staple jam has occurred in the stapler of the Finisher or Saddle Stitch unit, clear the jam following the procedure
below.
P.43 "Staple jam in the Finisher"
P.44 "Staple jam in the Saddle Stitch unit"

Staple jam in the Finisher

Open the front cover of the Finisher.
1
2 Remove the staple cartridge.
3 Lower the guide while holding the knob.
A: Stapling area
Do not touch the stapling area.
The actual needle point could cause you personal injury
4 Remove the jammed staples.
1 TROUBLESHOOTING FOR THE HARDWARE
A

Clearing a Staple Jam

43