Cannot Remember The Document Password For A Private Print Job - Kyocera TASKalfa 650c Troubleshooting Manual

3 TROUBLESHOOTING FOR PRINTING
Press the [START] button.
5
Printing is performed. Press [JOB STATUS] when printing has been completed.
Printing by selecting a paper size already placed in another drawer
You can perform printing with the paper already placed in the drawers. Some part of the image may not be printed,
however, if the paper size in the drawer is smaller than the one you have specified.
Press the drawer button you intend to use on the touch panel and press the [START] button.

Cannot remember the document password for a Private Print job

Problem Description
I cannot remember the document password for my Private Print job.
Corrective Action
The document password for a Private Print job is never shown, once the job has been sent to the equipment.
To print the failed Private Print job, submit the document again as a new Private Print job.
The failed Private Print job remains unprinted in the job queue. To delete it, either way below is required. Contact the
administrator of the equipment.
Enter the administrator's password in the Private Print job list on the touch panel and delete the job.
For details, refer to the Printing Guide.
Log on COMMAND CENTER with the administrator's password and delete the job in the Print Job list.
For details, refer to the COMMAND CENTER Guide.
66 Print Job Problems