Table of Contents
Advertisement
INSTALLATION, OPERATION AND CARE OF
MODELS EF3, EF4 & EF5 ECONOFRY GAS FRYERS
PLEASE KEEP THIS MANUAL FOR FUTURE USE
Your Vulcan-Hart Gas Fryer is produced with quality workmanship and material. Proper installation,
usage and maintenance will result in many years of satisfactory performance.
It is suggested that you thoroughly read this entire manual and carefully follow all of the instructions
provided.
OPTIONAL FIELD INSTALLABLE ACCESSORIES
Tank Brush
Tank Cover
(4) Casters
Before installing the fryer, verify that the type of gas (natural or propane) agrees with the
specifications on the fryer data plate which is located on the inside of the door. Also be sure the
fryer is built for the installation elevation.
The fryer must be restrained with adequate ties to prevent tipping when installed in order to avoid
the splashing of hot liquid.
UNPACKING
This fryer was carefully inspected before leaving the factory. The transportation company assumes
full responsibility for safe delivery upon acceptance of the shipment. Immediately after unpacking
the fryer, check for possible shipping damage. If the fryer is found to be damaged, save the
packaging material and contact the carrier within 15 days of delivery.
Do not use the door or its handle to lift or move the fryer.
ITEMS PACKAGED WITH FRYER
Crumb Screen
Drain Pipe
(4) Legs
GENERAL
Grease Strip
(2) Twin Fry Baskets
Single Basket
INSTALLATION
Basket Hanger
(2) Twin Fry Baskets
Manual
— 3 —
4' (1.21 m) Quick Disconnect Hose
Warranty and Service Pack
Advertisement
Table of Contents
