Installation; Clearances; F-31233 Rev. K (February - Vulcan-Hart 1GR35M ML-136407 Installation & Operation Manual

GRM SERIES GAS FRYERS
Check that the following have been included:

Crumb Rack

Basket Hanger

Twin Fry Baskets (2)

Tank Brush

Adjustable Casters (4) two locking, two non-locking for freestanding fryers. Fryer
Batteries with the KleenScreen PLUS® Filtration System have casters installed
from the factory.

Drain Pipe Extension for freestanding fryers only.

Cleanout Rod for freestanding fryers only.

Crumb Scoop for freestanding fryers only.

Manual and Warranty

Fryer Batteries with the KleenScreen PLUS® Filtration System
 Filter Pan
 Suction Tube
 Screen Assembly
 Complimentary Pack of Micro-Filtration Envelopes
 6' high temperature discard hose
Do not use the door or its handle to lift the fryer.
Before installing the fryer, verify that the type of gas (natural or propane) agrees with the
specifications on the fryer data plate, which is located on the inside of the door panel.
Make sure the fryer is configured for the proper elevation.
Record your fryer model, device, and serial numbers for future reference in the space
provided below. This information can be found on the fryer data plate.
Fryer Model No: ___________________________
Device:___________________________________
Serial No: ________________________________

Clearances


Minimum clearance from combustible construction:
6" (15 cm) from the sides of the fryer
6" (15 cm) from the back of the fryer
The fryer may be installed on combustible floors
VULCAN-HART

INSTALLATION

-5-

F-31233 Rev. K (February 2011)