Original Orientation - Kyocera TASKalfa 250ci Operation Manual

Original Orientation

To send the document in the orientation that can be read properly, specify the upper orientation of original. To
use the functions below, select the orientation in which the original is set on the platen.
• 2-sided/Book Original
• Border Erase
* If [On] is selected as the Orientation Confirmation (page 8-15) setting in the System Menu, the selection
screen for original orientation appears when you select any of the above functions.
When placing the original on the platen
When placing the original on the optional document processor
Use the procedure below to select the orientation when placing the originals on the platen for sending.
Original [Top Edge Top]
Original [Top Edge Top]
[Top Edge Left]
[Top Edge Left]
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then

[Original Orientation].

5-11
Sending Functions
5